how to use the kill password?

// Expert user has replied.
D Dennis Rene Chavez Hernriquez 2 years 9 months ago
134 2 0

I am placing a kill password when I write the tag but when I want to kill over the tag I put the same password but it generates an error.

Tag Encoding :urn:epc:tag:sgtin-96:3.0607766.054102.18385
Pure Identity :urn:epc:id:sgtin:0607766.054102.18385
Legacy :gtin=00607766541022;serial=18385
Hexadecimal :307425185834D580000047D1
Binario :001100000111010000100101000110000101100000110100110101011000000000000000000000000100011111010001

^XA
^RS4
^MMT^PW812^LL0102^LS0
^FO25,36^ADN,18,10^FDDrinking Water Agua Purificada^FS
^FO580,36^BQN,2,3^FDMM,00607766541022*Drinking Water Agua Purificada^FS
^FO25,58^ADN,18,10^FDRFID - TAG^FS
^FO25,78^ADN,18,10^FDSerial:018385^FS
^FO25,103^ADN,18,10^FD00607766541022^FS
^RFW,H^FD307425185834D580000047D1^FS    

Please register or login to post a reply

2 Replies

M Manuel Caicedo-Rivera

Hi Dennis,

What printer are you using for your implementation? The ZPL RFID commands are dependent on Zebra printer model, please, check the link below to verify compatibility.

https://www.zebra.com/content/dam/zebra/manuals/printers/common/program…

Here, below a link where you can select the right RFID manual for the right printer.

RFID Programming Guide for Zebra Printers | Zebra

For example, if you are using a ZD500R model, please, check the link below for the right RFID manual, and take a look at pages 60, 61, 62 & 63 for knowing how to use ^RL command for kill password.

https://support.zebra.com/cpws/docs/ait/KA_files/8973/rfid3-pg-en.pdf

Thanks,

MC

D Dmitry Prokhorov

Hello Dennis,

As you can see on a page 392 of ZPL manual, to set a killswitch password the ^RZ command requires you to use K flag instead of E:
https://www.zebra.com/content/dam/zebra/manuals/printers/common/program…
It looks like there is no L flag for ^RZ command. Please check all your commands and respective options with mentioned document.

Also you may need to check if ^RZ command is supported in a version of your printer firmware.

Dmitry Prokhorov
Software Engineer, Kutir Mobility
Posted on behalf of Zebra Technologies

CONTACT
Can’t find what you’re looking for?