How to use the SSCC-18 in the Zebra Designer XML

Hi all,

I need a help

When I make a new format and use the barcode option SSCC-18, the variable doesn't print the correct format

Is there a setup I need to do in the printer?

Is there a setup need to in the software?

Thanks a lot

Uvilton

Anonymous (not verified)
Hi Uvilton,Can you give an

Hi Uvilton,

Can you give an example of what you are seeing?  Do you have an example of what you expect?

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Uvilton Vieira Filho
Hi RobinHow are you?When I

Hi Robin

How are you?

When I make the design show the SSCC-18 look like the picture

But when I print it to show

The barcode doesn't consider the 00 in the front of the label, do you have a suggestion for this case?

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Soma Raju Saladi
Hi Uvilton,I have exactly

Hi Uvilton,

I have exactly same issue.  Can you please let me know if you were able to resolve yours.  If yes, may I know the solution.

Thanks,

Raju

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Dmitry Prokhorov
Hello Uvilton,You may need to

Hello Uvilton,

You may need to check your printer firmware version. In case it is later than x.10.x you could be able to format the interpretation line with parentheses and spaces using  separate text field this way:

^XA

^FO25,25

^BCN,150,N,N,Y

^FD>;>10495491303156301^FS

^FO100,190

^A0N,50,40

^FD(00) 1 0495491 30315630 1^FS

^XZ

Look here for details please:

https://www.zebra.com/content/dam/zebra/manuals/printers/common/programming/zpl-zbi2-pm-en.pdf#page=84

Dmitry Prokhorov

Software Engineer, Kutir Mobility

Posted on behalf of Zebra Technologies

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Dmitry Prokhorov
Hello Uvilton,There are two

Hello Uvilton,

There are two options to resolve your issue. See this response please:

Also you may need to check your firmware version.

Dmitry Prokhorov

Software Engineer, Kutir Mobility

Posted on behalf of Zebra Technologies

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Log in to post comments