I am looking for what the specs are for the external antenna that connects to an RD5000 device.
Part#: RF1000-FL-EXTANT1
I would appreciate if anyone can provide me with a document for this antenna.
Part#: RF1000-FL-EXTANT1
I would appreciate if anyone can provide me with a document for this antenna.
Good morning Justin, any luck with your request?
I have a customer that is asking for the same info and I cannot found it.
Serge
Points: 0
You voted ‘up’
Serge,
I was told by engineering (I do not have a reference by name) a while back that the specs for this antenna are the same as the specs for the (internal) antenna already integrated on the RD5000 device. These specs can be located on page 216 of 228 in the RD5000 Integrators Guide (link below).
RFID
Standards Supported EPC Generation 2 UHF
Nominal read range 10 ft./3.04 m with the RFX6000 4x4 tag optimally oriented.
Field Half read range beam width: +/- 80 degrees (with tags optimally oriented).
Antenna Integrated, circularly polarized, 1.5 dB effective linear gain per axis (nominal); Antenna port for future support of optional external antenna.
Frequency Range 902-928 MHz
Output power 1W conducted (1.4W EIRP with integrated antenna)
Points: 1
You voted ‘up’
Serge
Points: 0
You voted ‘up’
Log in to post comments