Please help me , Iam using the zebra IMZ320 printer to print pdf as image from android application , and the printer print the pdf successfully but it print some blank feed in the end of paper although i send the command with ^LL height of the image , what is wrong ??
Pdf print// Expert user has replied. |
6 Replies
Hi Mina,
Please, send these commands to the printer by using the ZSU tool.
! U1 "ezpl.media_type" "continuous"
! U1 "ezpl.print_mode" "tear off"
Send to print jobs tests, and let us know if it fixed the issue.
Thanks,
MC
Hi Manuel ,
Please can you send me the zpl commands of those two commands .
Thank you
Hi Manuel ,
here is the report , please tell me what to do .
input.
input.capture : off , Choices: print,run,usb_host,off
print.
print.contrast : 0 , Choices: 0-3
print.tone : 0 , Choices: -100..200
print.tone_format : cpcl , Choices: cpcl,zpl
print.tone_zpl : 10.0 , Choices: 0.0-30.0
print.print_adj : 0 , Choices: -127-128
print.troubleshooting_label_choices :
print.troubleshooting_label_print
mcr.
rtc.
rtc.time : 00:01:11
rtc.date : 10-07-2016
rtc.timezone : UTC00
rtc.exists : no
usb.
usb.device.
usb.device.vendor_id : 0x0A5F
usb.device.product_id : 0x00F3
usb.device.device_version : 1.1
usb.device.product_string : ZTC iMZ320-203dpi CPCL
usb.device.manufacturer_string : Zebra Technologies
usb.device.serial_string : iMZ320
usb.device.device_id_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;
usb.device.device_unique_id : off , Choices: on,off
usb.connected : yes
usb.halt : no , Choices: yes,no
log.
log.reboot.
log.reboot.code : 11
log.reboot.reason : Off key
log.reboot.codes : bbbbbbbb8bbbbb000bbbbbb4b444bbbb
log.reboot.report : Off key
Off key
Off key
Off key
Off key
Off key
Off key
Off key
New OS reprogramming
Off key
Off key
Off key
Off key
Off key
Other
Other
Other
Off key
Off key
Off key
Off key
Off key
Off key
Low battery timeout
Off key
Low battery timeout
Low battery timeout
Low battery timeout
Off key
Off key
Off key
Off key
netmanage.
netmanage.type : none , Choices: none,avalanche
netmanage.status_code : 0
netmanage.state_code : 0
netmanage.error_code : 0
netmanage.avalanche.
netmanage.avalanche.model_name :
netmanage.avalanche.interval : 60000 , Choices: 0-4294967295
netmanage.avalanche.startup_update : off , Choices: on,off
netmanage.avalanche.interval_update : off , Choices: on,off
netmanage.avalanche.agent_addr : 0.0.0.0
netmanage.avalanche.available_agent : 0.0.0.0
netmanage.avalanche.available_port : 1 , Choices: 1-65535
netmanage.avalanche.encryption_type : 0 , Choices: 0-255
netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.terminal_id : 0 , Choices: 0-65535
netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295
netmanage.avalanche.text_msg.
netmanage.avalanche.text_msg.print : off , Choices: on,off
netmanage.avalanche.text_msg.display : off , Choices: on,off
netmanage.avalanche.text_msg.beep : off , Choices: on,off
netmanage.avalanche.set_property
zbi.
zbi.revision : ZBI Version 2.1
zbi.state : off
zbi.last_error :
zbi.program_list, Choices: fill,execute
zbi.start_info.
zbi.start_info.file_name : *:\.BAZ
zbi.start_info.memory_alloc : 0
zbi.start_info.execute
zbi.control.
zbi.control.terminate
zbi.control.run
zbi.control.break
zbi.control.restart
zbi.control.step
zbi.control.variable_name :
zbi.control.variable_value :
zbi.control.add_breakpoint
zbi.control.delete_breakpoint
zbi.control.clear_breakpoints
zbi.control.line_number : 0
zbi.reseller_key
zbi.key : DISABLED
zbi.running_program_name :
zbi.key_version : 1.1
zpl.
zpl.calibrate
zpl.relative_darkness : 0 , Choices: -300-300
zpl.save
zpl.label_length : 2030 , Choices: 1-32000
zpl.left_position : 0 , Choices: -9999-9999
zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff
zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff
zpl.delimiter : , (2C) , Choices: 00-FF,00-ff
zpl.zpl_mode : zpl II , Choices: zpl II,zpl
zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000
zpl.system_error : 0,0,00000000,00000000
zpl.no_errors_boot_done : yes
zpl.print_orientation : nor , Choices: nor,inv
zpl.label_top : 0 , Choices: -60-60
internal_wired.
rfid.
interface.
interface.network.
interface.network.settings_require_reset : no
interface.network.active.
interface.network.active.printserver : unknown
interface.network.active.ip_addr : 0.0.0.0
interface.network.active.netmask : 0.0.0.0
interface.network.active.gateway : 0.0.0.0
interface.network.active.protocol : all
interface.network.active.default_addr_enable : on
interface.network.active.wins_addr : 0.0.0.0
interface.network.active.arp_interval : 0
interface.network.active.mac_addr : 00:00:00:00:00:00
interface.network.active.mac_raw : 000000000000
interface.network.active.server_protocol :
interface.network.active.server_address : 0.0.0.0
interface.network.active.dhcp_received_host_name :
interface.network.active.cable_type : unknown
interface.network.active.speed : 0
interface.network.active.rx_packets :
interface.network.active.rx_errors :
interface.network.active.tx_packets :
interface.network.active.tx_errors :
interface.network.active.protocol_error : None
cutter.
cutter.clean_cutter
line_print.
line_print.buffer_height : 2400 , Choices: 412-2400
apl.
apl.enable : none , Choices: none
apl.framework_version : 1.2
apl.version : none
apl.o.
apl.o.graphics_byte_width : 72 , Choices: 0-255
formats.
formats.cancel_all :
ezpl.
ezpl.print_width : 576 , Choices: 2-576
ezpl.media_type : mark , Choices: continuous,mark
ezpl.print_method : direct thermal , Choices: direct thermal
ezpl.tear_off : 0 , Choices: -120-120
ezpl.print_mode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator
ezpl.reprint_mode : off , Choices: on,off
ezpl.head_close_action : feed , Choices: feed,length,no motion
ezpl.power_up_action : no motion , Choices: feed,length,no motion
ezpl.label_length_max : 39 , Choices: 1.0-39.0
ezpl.manual_calibration : complete , Choices: inProgress,complete
ezpl.label_sensor : 70 , Choices: 0-255
ezpl.take_label : , Choices: 0-255
ezpl.restore_defaults, Choices: reload printer,reload network
alerts.
alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N
alerts.add
alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD, RIBBON AUTH ERROR, ODOMETER TRIGGERED
alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK
alerts.tracked_settings.
alerts.tracked_settings.zbi_notified :
alerts.tracked_settings.log_tracked :
alerts.tracked_settings.log :
alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000
alerts.tracked_settings.clear_log
alerts.http.
alerts.http.proxy :
alerts.http.logging.
alerts.http.logging.entries
alerts.http.logging.max_entries : 0 , Choices: 0-10000
alerts.http.logging.clear
alerts.http.authentication.
alerts.http.authentication.add
alerts.http.authentication.remove
alerts.http.authentication.entries :
weblink.
weblink.enable : off
weblink.printer_reset_required : no
weblink.restore_defaults
weblink.logging.
weblink.logging.entries
weblink.logging.max_entries : 0 , Choices: 0-10000
weblink.logging.clear
weblink.ip.
weblink.ip.conn1.
weblink.ip.conn1.location :
weblink.ip.conn1.retry_interval : 10 , Choices: 1-600
weblink.ip.conn1.proxy :
weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn1.authentication.
weblink.ip.conn1.authentication.add
weblink.ip.conn1.authentication.remove
weblink.ip.conn1.authentication.entries :
weblink.ip.conn1.test.
weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn1.num_connections : 0
weblink.ip.conn2.
weblink.ip.conn2.location :
weblink.ip.conn2.retry_interval : 10 , Choices: 1-600
weblink.ip.conn2.proxy :
weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn2.authentication.
weblink.ip.conn2.authentication.add
weblink.ip.conn2.authentication.remove
weblink.ip.conn2.authentication.entries :
weblink.ip.conn2.test.
weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn2.num_connections : 0
weblink.cloud_connect.
weblink.cloud_connect.enable : on , Choices: on,off
weblink.cloud_connect.connect
weblink.cloud_connect.status : NOT ACTIVE
weblink.cloud_connect.connection_key : 0000000000
weblink.cloud_connect.configuration_key : 0000000000
weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete
weblink.zebra_connector.
weblink.zebra_connector.version : 0.04
weblink.zebra_connector.enable : on , Choices: on,off
weblink.zebra_connector.proxy :
weblink.zebra_connector.authentication.
weblink.zebra_connector.authentication.add
weblink.zebra_connector.authentication.remove
weblink.zebra_connector.authentication.entries :
capture.
capture.channel1.
capture.channel1.port : off , Choices: usb,bt,off
capture.channel1.delimiter :
capture.channel1.max_length : 1000 , Choices: 1-3000
capture.channel1.count : 0 , Choices: 0-4294967295
capture.channel1.data.
capture.channel1.data.raw :
capture.channel1.data.mime :
nfc.
cradle.
ribbon.
""bluetooth.
bluetooth.discoverable : on , Choices: on,off
bluetooth.friendly_name : XXXXJ141701348
bluetooth.version : 4.3.1p1
bluetooth.date : 02/13/2015
bluetooth.local_name : XXXXJ141701348
bluetooth.address : AC:3F:A4:19:47:4F
bluetooth.bluetooth_pin : *
bluetooth.short_address : AC3FA419474F
bluetooth.radio_version : 2.1
bluetooth.enable : on , Choices: on,off
bluetooth.connected : no
bluetooth.minimum_security_mode : 1 , Choices: 1,2,3,4
bluetooth.connected_security_mode : nc
bluetooth.bonding : on , Choices: on,off
bluetooth.clear_bonding_cache
bluetooth.enable_reconnect : iOS_only , Choices: off,iOS_only
bluetooth.allow_non_display_numeric_comparison : print , Choices: off,print,no print
bluetooth.json_config_channel_enable : on , Choices: on,off
bluetooth.page_scan_window : 60 , Choices: 15,60
card.
card.inserted : Not Inserted
card.cisproc : Processed
card.mfgid :
card.cardid :
card.fncode : 000c
card.idtext1 :
card.idtext2 :
card.idtext3 :
card.idtext4 :
card.fcrbase : Not Detected
card.fcrlist : NONE DETECTED
card.defcfg : Not Detected
card.cor : Not Present
card.mac_addr : 00:00:00:00:00:00
card.mac_raw : 000000000000
card.enable : on , Choices: on,off
comm.
head.
head.latch : ok
head.resolution.
head.resolution.in_dpi : 203
ip.
ip.dhcp.
ip.dhcp.enable : on , Choices: on,off
ip.dhcp.cid_type : 1 , Choices: 0,1,2
ip.dhcp.cid_prefix :
ip.dhcp.cid_value : 000000000000
ip.dhcp.requests_per_session : 2 , Choices: 1-10
ip.dhcp.request_timeout : 2 , Choices: 2-30
ip.dhcp.session_interval : 10 , Choices: 0-60
ip.dhcp.lease.
ip.dhcp.lease.length : 0
ip.dhcp.lease.time_left : 0
ip.dhcp.lease.server : 0.0.0.0
ip.dhcp.lease.last_attempt : 0
ip.dhcp.cache_ip : off , Choices: on,off
ip.dhcp.vendor_class_id : Zebra Technologies ZTC iMZ320-203dpi CPCL
ip.dhcp.user_class_id :
ip.dhcp.option12 : on , Choices: on,off
ip.dhcp.option12_format :
ip.dhcp.option12_value : XXXXJ141701348
ip.dhcp.cid_enable : off , Choices: on,off
ip.dhcp.cid_suffix : 000000000000
ip.dhcp.cid_all : 000000000000
ip.dhcp.arp_verify : off , Choices: on,off
ip.dhcp.auto_provision_enable : on , Choices: on,off
ip.dhcp.ntp.
ip.dhcp.ntp.enable : off , Choices: on,off
ip.dhcp.ntp.received_servers :
ip.ftp.
ip.ftp.enable : on , Choices: on,off
ip.ftp.execute_file : off , Choices: on,off
ip.ftp.request_password : no , Choices: yes,no
ip.lpd.
ip.lpd.enable : on , Choices: on,off
ip.tcp.
ip.tcp.enable : on , Choices: on,off
ip.tcp.nagle_algorithm : enabled , Choices: enabled,disabled
ip.udp.
ip.udp.enable : on , Choices: on,off
ip.http.
ip.http.enable : on , Choices: on,off
ip.http.admin_name : admin
ip.http.admin_password : *
ip.http.port : 80
ip.http.faq_url : http://support.zebra.com
ip.http.custom_link_name :
ip.http.custom_link_url :
ip.smtp.
ip.smtp.enable : on , Choices: on,off
ip.smtp.server_addr : 0.0.0.0
ip.smtp.domain : ZBRPrintServer.com
ip.pop3.
ip.pop3.enable : on , Choices: on,off
ip.pop3.print_headers : off , Choices: on,off
ip.pop3.verbose_headers : off , Choices: on,off
ip.pop3.print_body : off , Choices: on,off
ip.pop3.save_attachments : off , Choices: on,off
ip.pop3.poll : 240 , Choices: 0-65535
ip.pop3.username :
ip.pop3.password : *
ip.pop3.server_addr : 0.0.0.0
ip.pop3.print_attachments : off , Choices: on,off
ip.snmp.
ip.snmp.enable : on , Choices: on,off
ip.snmp.get_community_name : *
ip.snmp.set_community_name : *
ip.snmp.create_mib
ip.snmp.trap_community_name : public
ip.telnet.
ip.telnet.enable : on , Choices: on,off
ip.telnet.disconnect
ip.addr : 0.0.0.0
ip.netmask : 255.255.255.0
ip.gateway : 0.0.0.0
ip.port : 6101
ip.remote :
ip.ping_remote
ip.netstat :
ip.remote_port : 10013
ip.remote_autoconnect : off , Choices: on,off
ip.bootp.
ip.bootp.enable : on , Choices: on,off
ip.mirror.
ip.mirror.auto : off , Choices: on,off
ip.mirror.username : user
ip.mirror.password : *
ip.mirror.server : 127.0.0.1
ip.mirror.path : Zebra
ip.mirror.freq : 0 , Choices: 0-65535
ip.mirror.fetch
ip.mirror.version : Oct 7 2016 21:40:23
ip.mirror.freq_hours : 0 , Choices: 0-100
ip.mirror.error_retry : 0 , Choices: 0-65535
ip.mirror.feedback.
ip.mirror.feedback.auto : off , Choices: on,off
ip.mirror.feedback.path : Zebra/feedback
ip.mirror.feedback.freq : 0 , Choices: 0-65535
ip.mirror.feedback.odometer : 0 , Choices: 0-4294967295
ip.mirror.success : no
ip.mirror.success_time : Oct 07 2016 00:00:13
ip.mirror.last_time : Oct 07 2016 00:00:13
ip.mirror.last_error : No Error
ip.mirror.mode : ftp , Choices: ftp,sftp
ip.mirror.reset_delay : 5 , Choices: 0-900
ip.mirror.interface : both , Choices: both,wired,wireless
ip.mirror.appl_path :
ip.ping_len : 56 , Choices: 56-65535
ip.dns.
ip.dns.domain :
ip.dns.servers :
ip.discovery.
ip.discovery.enable : on , Choices: on,off
ip.discovery.port : 4201
ip.roam_packet : on , Choices: on,off
ip.arp_interval : 0 , Choices: 0-30
ip.primary_network : 2 , Choices: 2
ip.active_network : unknown
ip.ntp.
ip.ntp.enable : off , Choices: on,off
ip.ntp.servers :
ip.ntp.log
ip.port_alternate : 9100
ip.port_json_config : 9200
ip.port_single_conn : 9300
ip.port_single_conn_idle_timeout : 180 , Choices: 0-3600
label.
label.x_move : 0 , Choices: -575-575
label.y_move : 0 , Choices: -32768-32767
media.
media.status : ok
media.sense_mode : bar , Choices: bar
media.tof : 0 , Choices: -84.0-64.0
media.type : label , Choices: label,journal
media.bar_location : front , Choices: front
media.width_sense.
media.width_sense.enable : off , Choices: off
media.width_sense.in_mm : 72.1
media.width_sense.in_cm : 7.21
media.width_sense.in_dots : 576
media.width_sense.in_inches : 2.837
media.printmode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator
media.speed : 3.2 , Choices: 1.0-5.0
media.feed_length : 1200 , Choices: 0-20000
media.feed_skip : 35 , Choices: 0-50
media.draft_mode : off , Choices: on,off
media.part_number :
media.serial_number :
sensor.
sensor.paper_supply : ok
sensor.peeler : clear
sensor.recall_factory_cal
sensor.peeler_present : Not Present
wlan.
wlan.operating_mode : infrastructure , Choices: ad hoc,infrastructure
wlan.essid : 125
wlan.current_essid :
wlan.station_name : ZEBRA
wlan.current_tx_rate : 1.0
wlan.encryption_mode : off , Choices: off,40-bit,128-bit
wlan.associated : no
wlan.encryption_index : 1 , Choices: 1,2,3,4
wlan.encryption_key1 : *
wlan.encryption_key2 : *
wlan.encryption_key3 : *
wlan.encryption_key4 : *
wlan.leap_mode : off , Choices: on,off
wlan.leap_username :
wlan.leap_password : *
wlan.power_save : on , Choices: on,off
wlan.auth_type : open , Choices: open,shared
wlan.preamble : long , Choices: long,short
wlan.bssid : 00:00:00:00:00:00
wlan.firmware_version : 00.00.00
wlan.signal_strength : 0
wlan.poor_signal_threshold : 0 , Choices: 0-100
wlan.international_mode : off , Choices: on,off
wlan.roam.
wlan.roam.signal : 40 , Choices: 1-75
wlan.roam.interval : 5 , Choices: 5-255
wlan.roam.interchannel_delay : 400 , Choices: 10-30000
wlan.roam.max_chan_scan_time : 100 , Choices: 10-500
wlan.roam.rssi : 80 , Choices: 60-125
wlan.roam.max_fail : 10 , Choices: 2-75
wlan.roam.monitor : off , Choices: off,print,file
wlan.channel_mask : 0x3FFF , Choices: 14 bits
wlan.channel :
wlan.wpa.
wlan.wpa.enable : off , Choices: off,on
wlan.wpa.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast
wlan.wpa.psk : *
wlan.wpa.wpa_version : none
wlan.wpa.groupkey_ciphersuite : NONE
wlan.wpa.pairwise_ciphersuite : NONE
wlan.wpa.timecheck : yes , Choices: yes,no
wlan.8021x.
wlan.8021x.enable : off , Choices: off,on,wpa
wlan.8021x.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast
wlan.8021x.ttls_tunnel : pap , Choices: pap,chap,mschap,mschapv2
wlan.8021x.peap.
wlan.8021x.peap.peap_username :
wlan.8021x.peap.peap_password : *
wlan.8021x.peap.privkey_password : *
wlan.8021x.peap.validate_server_certificate : on , Choices: on,off
wlan.8021x.eap.
wlan.8021x.eap.username :
wlan.8021x.eap.password : *
wlan.8021x.eap.privkey_password : *
wlan.adhocchannel : 1 , Choices: 1,2,3,4,5,6,7,8,9,10,11,12,13,14
wlan.adhocautomode : off , Choices: on,off
wlan.enable : on , Choices: on,off
wlan.encryption_optional : no , Choices: yes,no
wlan.adhoc_last_channel
wlan.secure_ssid : off , Choices: on,off
wlan.ip.
wlan.ip.addr : 0.0.0.0
wlan.ip.netmask : 255.255.255.0
wlan.ip.gateway : 0.0.0.0
wlan.ip.port : 6101
wlan.ip.arp_interval : 0 , Choices: 0-30
wlan.ip.dhcp.
wlan.ip.dhcp.requests_per_session : 2 , Choices: 1-10
wlan.ip.dhcp.request_timeout : 2 , Choices: 2-30
wlan.ip.dhcp.session_interval : 10 , Choices: 0-60
wlan.ip.dhcp.lease.
wlan.ip.dhcp.lease.length : 0
wlan.ip.dhcp.lease.time_left : 0
wlan.ip.dhcp.lease.server : 0.0.0.0
wlan.ip.dhcp.lease.last_attempt : 0
wlan.ip.dhcp.cache_ip : off , Choices: on,off
wlan.ip.dhcp.cid_type : 1 , Choices: 0,1,2
wlan.ip.dhcp.cid_prefix :
wlan.ip.dhcp.cid_enable : off , Choices: on,off
wlan.ip.dhcp.cid_suffix : 000000000000
wlan.ip.dhcp.cid_all : 000000000000
wlan.ip.dhcp.option12 : on , Choices: on,off
wlan.ip.dhcp.option12_format :
wlan.ip.dhcp.option12_value : XXXXJ141701348
wlan.ip.dhcp.arp_verify : off , Choices: on,off
wlan.ip.protocol : all , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent
wlan.ip.default_addr_enable : on , Choices: off,on,saved_ip
wlan.ip.timeout.
wlan.ip.timeout.enable : on , Choices: on,off
wlan.ip.timeout.value : 300 , Choices: 1-3600
wlan.ip.dns.
wlan.ip.dns.domain :
wlan.ip.dns.servers :
wlan.ip.wins.
wlan.ip.wins.addr : 0.0.0.0
wlan.ip.wins.permanent_source : off , Choices: on,off
wlan.ip.port_alternate : 9100
wlan.ip.port_json_config : 9200
wlan.keep_alive.
wlan.keep_alive.enable : on , Choices: on,off
wlan.keep_alive.timeout : 15 , Choices: 5-300
wlan.wep.
wlan.wep.index : 1 , Choices: 1,2,3,4
wlan.wep.auth_type : open , Choices: open,shared
wlan.wep.key_format : hex , Choices: hex,ascii
wlan.wep.key1 : *
wlan.wep.key2 : *
wlan.wep.key3 : *
wlan.wep.key4 : *
wlan.security : none , Choices: none,wep 40-bit,wep 128-bit,eap-tls,eap-ttls,eap-fast,peap,leap,wpa psk,wpa eap-tls,wpa eap-ttls,wpa eap-fast,wpa peap,wpa leap
wlan.private_key_password : *
wlan.username :
wlan.password : *
wlan.mac_addr : 00:00:00:00:00:00
wlan.mac_raw : 000000000000
wlan.11n.
wlan.11n.greenfield : unsupported
wlan.11n.short_gi_40mhz : unsupported
wlan.11n.short_gi_20mhz : unsupported
wlan.11n.rifs : unsupported
wlan.11n.20mhz_only : unsupported
wlan.11n.amsdu : unsupported
wlan.region_code : all
wlan.country_code : all , Choices: all
wlan.user_channel_list : 1,2,3,4,5,6,7,8,9,10,11 , Choices: 1,2,3,4,5,6,7,8,9,10,11,all
wlan.allowed_band : 2.4 , Choices: 2.4
wlan.waveagent.
wlan.waveagent.enable : unsupported
wlan.waveagent.udp_port : unsupported
wlan.permitted_channels : 1,2,3,4,5,6,7,8,9,10,11
wlan.active_channels : 1,2,3,4,5,6,7,8,9,10,11
wlan.11d.
wlan.11d.enable : off , Choices: on,off
wlan.11d.current_country : not available
wlan.11d.discovered_channels : not available
wlan.authenticated : no
wlan.available : no
wlan.authentication_error : none
wlan.regulatory_data_version : 1.19
wlan.rts_cts_enabled
wlan.11ac.
wlan.11ac.short_gi_80mhz : unsupported
wlan.11ac.ldpc : unsupported
wlan.11ac.stbc : unsupported
wlan.11ac.80mhz_enable : unsupported
wlan.pmf : enabled , Choices: disabled,enabled,required
display.
memory.
memory.flash_size : 16777216 Bytes
memory.ram_size : 4194304 Bytes
memory.flash_free : 16607744 Bytes Free
memory.ram_free : 4171776 Bytes Free
power.
power.voltage : 7.91
power.percent_full : 100% Full
power.status : ok
power.low_battery_warning : 6.93(176)
power.low_battery_shutdown : 6.53(166)
power.low_battery_timeout : 60 Seconds , Choices: 0-8191
power.inactivity_timeout : 0 Seconds , Choices: 0-65535
power.dtr_power_off : off , Choices: on,off
power.shutdown
power.ascii_graph : ÞÍÍÍÍÍÃ
power.power_on_cycles : 144
power.label_queue.
power.label_queue.shutdown : no , Choices: yes,no
file.
file.dir :
- DIR *:*.*
* E:TT0003M_.TTF 169188
* Z:0.TTF 125904 P 0
* Z:A.FNT 6839 P A
* Z:AZTEC.BAR 0 P
* Z:B.FNT 7746 P B
* Z:BTSYMBOL.PCX 884 P
* Z:CODABAR.BAR 0 P
* Z:CODABLK.BAR 0 P
* Z:CODE11.BAR 0 P
* Z:CODE128.BAR 0 P
* Z:CODE39.BAR 0 P
* Z:CODE49.BAR 0 P
* Z:CODE93.BAR 0 P
* Z:D.FNT 10648 P CD
* Z:E12.FNT 15691 P
* Z:E24.FNT 47056 P
* Z:E6.FNT 8520 P
* Z:E8.FNT 10893 P E
* Z:EAN-13.BAR 0 P
* Z:EAN-8.BAR 0 P
* Z:ELEMENTOUT.ZPL 3830 P
* Z:F.FNT 13275 P F
* Z:FIRSTDOTLOCATION.ZPL 10420 P
* Z:G.FNT 49663 P G
* Z:GS.FNT 5470 P ?
* Z:H12.FNT 11536 P
* Z:H24.FNT 30436 P
* Z:H6.FNT 7247 P
* Z:H8.FNT 7825 P H
* Z:I2OF5.BAR 0 P
* Z:IDMATRIX.BAR 0 P
* Z:IMAGECOMPRESSION.ZPL 9524 P
* Z:IND2OF5.BAR 0 P
* Z:INDEX.SHTML 6635 P
* Z:LANGUAGE.BMP 400 P
* Z:LOGMARS.BAR 0 P
* Z:LOGO.PNG 20154 P
* Z:MAXICODE.BAR 0 P
* Z:MIB200.TXT 46572 P
* Z:MICROPDF.BAR 0 P
* Z:MSICODE.BAR 0 P
* Z:NETWORK.BMP 400 P
* Z:ONEDOT.BMP 58 P
* Z:P.FNT 116 P P
* Z:PASSWORD.WML 1304 P
* Z:PDF417.BAR 0 P
* Z:PLANETCD.BAR 0 P
* Z:PLESSEY.BAR 0 P
* Z:PORTS.BMP 400 P
* Z:POSTNET.BAR 0 P
* Z:PRINTBTMAC.CMD 287 P
* Z:Q.FNT 116 P Q
* Z:QRCODE.BAR 0 P
* Z:R.FNT 116 P R
* Z:REGDB.NRD 297896 P
* Z:REPRINT.NRD 3 P
* Z:RFIDRCPE.XML 32780 P
* Z:RSS.BAR 0 P
* Z:S.FNT 116 P S
* Z:S2OF5.BAR 0 P
* Z:SENSORS.BMP 400 P
* Z:SETTINGS.BMP 400 P
* Z:SIGNAL_STRENGTH_0_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_1_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_2_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_3_BAR_ICON.BMP 128 P
* Z:SIGNAL_STRENGTH_4_BAR_ICON.BMP 128 P
* Z:T.FNT 116 P T
* Z:TLC39.BAR 0 P
* Z:TOOLS.BMP 400 P
* Z:TWO_KEY_MESSAGE.BMP 8704 P
* Z:U.FNT 116 P U
* Z:UIF.SS 11596 P
* Z:UPC-A.BAR 0 P
* Z:UPC-E.BAR 0 P
* Z:UPC-EAN.BAR 0 P
* Z:UTT.SS 11588 P
* Z:V.FNT 116 P V
- 4171776 bytes free R: RAM
- 16607744 bytes free E: ONBOARD FLASH
file.type : "?"
file.delete
file.print
file.run
file.rename
file.dir_format : zpl , Choices: cpcl,zpl
file.drive_info
file.drive_listing
file.capture_response.
file.capture_response.begin
file.capture_response.end
file.capture_response.destination : printer_file , Choices: printer_file,usb_file
odometer.
odometer.user_label_count : 38 , Choices: 0-4294967295
odometer.user_label_count1 : 38
odometer.user_label_count2 : 38
odometer.total_label_count : 38
odometer.total_print_length : 1294 INCHES, 3289 CENTIMETERS
odometer.latch_open_count : 33
odometer.label_dot_length : 34
odometer.media_marker_count : 12
odometer.media_marker_count1 : 1294 INCHES, 3289 CENTIMETERS
odometer.media_marker_count2 : 1294 INCHES, 3289 CENTIMETERS
odometer.headclean : 1294 INCHES, 3289 CENTIMETERS
odometer.headnew : 1294 INCHES, 3289 CENTIMETERS
odometer.rfid.
appl.
appl.date : 10/7/2016
appl.name : V73.20.01Z
appl.version : 7320
appl.bootblock : 5.5.13
appl.link_os_version : 4.0
device.
device.reset
device.restore_defaults, Choices: wlan,ip,power,bluetooth,all,device.alerts
device.prompted_network_reset, Choices: yes,no
device.friendly_name : XXXXJ141701348
device.company_name : Zebra Technologies
device.product_name : iMZ320
device.product_name_submodel : none
device.company_contact :
device.location :
device.position.
device.position.latitude : 0.000000 , Choices: -90.0-90.0
device.position.longitude : 0.000000 , Choices: -180.0-180.0
device.position.altitude : 0.000000 , Choices: -10000.0-406700000.0
device.position.accuracy : 0.000000 , Choices: 0.0-406700000.0
device.status : ready
device.jobs_print : 1
device.languages : line_print , Choices: zpl,line_print,hybrid_xml_zpl
device.cph_enable : off , Choices: on,off
device.cph_interval : 0 , Choices: 0-65535
device.macro_get :
device.user_p1 :
device.user_p2 :
device.uptime : 00 days 00 hours 02 mins 34 secs
device.volume :
device.local_menu_mode : off , Choices: off,on
device.printhead.
device.printhead.serialnum : No Serial Number Available
device.printhead.coldwarning :
device.printhead.resolution : 8.0
device.frontpanel.
device.unique_id : XXXXJ141701348
device.xml.
device.xml.enable : on , Choices: on,off
device.ff_disable : off , Choices: on,off
device.pnp_option : cpcl , Choices: cpcl,zpl,epl
device.pnp_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;
device.download_connection_timeout : 0 , Choices: 0-65535
device.save_2key : off , Choices: on,off,now
device.print_2key :
device.print_reprogram_2key : on , Choices: on,off
device.epl_legacy_mode : off
device.cpcl_synchronous_mode : off , Choices: on,off
device.command_override.
device.command_override.add
device.command_override.clear
device.command_override.list :
device.command_override.active : yes , Choices: yes,no
device.host_identification : iMZ320-200dpi,V73.20.01Z,8,4096KB
device.host_status : 000,0,0,2030,000,0,0,0,000,0,0,0
000,0,0,0,0,0,4,0,00000000,1,000
1234,0
device.super_host_status
device.pause
device.unpause
device.serial_numbers.
device.serial_numbers.mlb :
device.serial_numbers.mlb_date :
device.serial_numbers.option_board :
device.serial_numbers.option_board_date :
device.serial_numbers.control_panel :
device.serial_numbers.control_panel_date :
device.serial_numbers.cutter :
device.serial_numbers.cutter_date :
device.ltu_installed : no
device.cutter_installed : no
device.rewinder_installed : no
device.bluetooth_installed : yes
device.print_out_report, Choices: settings,network,formats,images,fonts,barcodes,all,sensor profile
device.diagnostic_print : disabled , Choices: disabled,enabled
device.job_log.
device.job_log.total_jobs : 3
device.print_geometry_revision : 0
device.user_vars.
device.user_vars.create
device.user_vars.set_range
device.docked : no , Choices: yes,no
device.syslog.
device.syslog.enable : off , Choices: off,on
device.syslog.configuration :
device.syslog.save_local_file : no , Choices: no,yes
device.syslog.log_max_file_size : 10000 , Choices: 10000-400000
device.syslog.entries
device.syslog.clear_log
device.feature.
device.feature.mfi : present
device.feature.mcr : not available
device.feature.bluetooth_le : not present
device.feature.nfc : not available
device.feature.ribbon_cartridge : not available
device.feature.lock : not available
device.feature.802_11ac : not available
device.feature.applicator : not available
device.feature.lighted_arrows : not available
device.configuration_number : M3I-0UB0E020-00
device.alerts.
device.alerts.audible :
device.pmcu.
device.pmcu.revision :
device.pmcu.desired_revision :
device.mcu_communication.
device.mcu_communication.revision :
device.mcu_communication.desired_revision :
device.mcu_cutter.
device.mcu_cutter.revision :
device.mcu_cutter.desired_revision :
device.set_clock_to_build_date : enabled , Choices: enabled,disabled
input.
input.capture : off , Choices: print,run,usb_host,off
print.
print.contrast : 0 , Choices: 0-3
print.tone : 0 , Choices: -100..200
print.tone_format : cpcl , Choices: cpcl,zpl
print.tone_zpl : 10.0 , Choices: 0.0-30.0
print.print_adj : 0 , Choices: -127-128
print.troubleshooting_label_choices :
print.troubleshooting_label_print
mcr.
rtc.
rtc.time : 00:02:34
rtc.date : 10-07-2016
rtc.timezone : UTC00
rtc.exists : no
usb.
usb.device.
usb.device.vendor_id : 0x0A5F
usb.device.product_id : 0x00F3
usb.device.device_version : 1.1
usb.device.product_string : ZTC iMZ320-203dpi CPCL
usb.device.manufacturer_string : Zebra Technologies
usb.device.serial_string : iMZ320
usb.device.device_id_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;
usb.device.device_unique_id : off , Choices: on,off
usb.connected : yes
usb.halt : no , Choices: yes,no
log.
log.reboot.
log.reboot.code : 11
log.reboot.reason : Off key
log.reboot.codes : bbbbbbbb8bbbbb000bbbbbb4b444bbbb
log.reboot.report : Off key
Off key
Off key
Off key
Off key
Off key
Off key
Off key
New OS reprogramming
Off key
Off key
Off key
Off key
Off key
Other
Other
Other
Off key
Off key
Off key
Off key
Off key
Off key
Low battery timeout
Off key
Low battery timeout
Low battery timeout
Low battery timeout
Off key
Off key
Off key
Off key
netmanage.
netmanage.type : none , Choices: none,avalanche
netmanage.status_code : 0
netmanage.state_code : 0
netmanage.error_code : 0
netmanage.avalanche.
netmanage.avalanche.model_name :
netmanage.avalanche.interval : 60000 , Choices: 0-4294967295
netmanage.avalanche.startup_update : off , Choices: on,off
netmanage.avalanche.interval_update : off , Choices: on,off
netmanage.avalanche.agent_addr : 0.0.0.0
netmanage.avalanche.available_agent : 0.0.0.0
netmanage.avalanche.available_port : 1 , Choices: 1-65535
netmanage.avalanche.encryption_type : 0 , Choices: 0-255
netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295
netmanage.avalanche.terminal_id : 0 , Choices: 0-65535
netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295
netmanage.avalanche.text_msg.
netmanage.avalanche.text_msg.print : off , Choices: on,off
netmanage.avalanche.text_msg.display : off , Choices: on,off
netmanage.avalanche.text_msg.beep : off , Choices: on,off
netmanage.avalanche.set_property
zbi.
zbi.revision : ZBI Version 2.1
zbi.state : off
zbi.last_error :
zbi.program_list, Choices: fill,execute
zbi.start_info.
zbi.start_info.file_name : *:\.BAZ
zbi.start_info.memory_alloc : 0
zbi.start_info.execute
zbi.control.
zbi.control.terminate
zbi.control.run
zbi.control.break
zbi.control.restart
zbi.control.step
zbi.control.variable_name :
zbi.control.variable_value :
zbi.control.add_breakpoint
zbi.control.delete_breakpoint
zbi.control.clear_breakpoints
zbi.control.line_number : 0
zbi.reseller_key
zbi.key : DISABLED
zbi.running_program_name :
zbi.key_version : 1.1
zpl.
zpl.calibrate
zpl.relative_darkness : 0 , Choices: -300-300
zpl.save
zpl.label_length : 2030 , Choices: 1-32000
zpl.left_position : 0 , Choices: -9999-9999
zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff
zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff
zpl.delimiter : , (2C) , Choices: 00-FF,00-ff
zpl.zpl_mode : zpl II , Choices: zpl II,zpl
zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000
zpl.system_error : 0,0,00000000,00000000
zpl.no_errors_boot_done : yes
zpl.print_orientation : nor , Choices: nor,inv
zpl.label_top : 0 , Choices: -60-60
internal_wired.
rfid.
interface.
interface.network.
interface.network.settings_require_reset : no
interface.network.active.
interface.network.active.printserver : unknown
interface.network.active.ip_addr : 0.0.0.0
interface.network.active.netmask : 0.0.0.0
interface.network.active.gateway : 0.0.0.0
interface.network.active.protocol : all
interface.network.active.default_addr_enable : on
interface.network.active.wins_addr : 0.0.0.0
interface.network.active.arp_interval : 0
interface.network.active.mac_addr : 00:00:00:00:00:00
interface.network.active.mac_raw : 000000000000
interface.network.active.server_protocol :
interface.network.active.server_address : 0.0.0.0
interface.network.active.dhcp_received_host_name :
interface.network.active.cable_type : unknown
interface.network.active.speed : 0
interface.network.active.rx_packets :
interface.network.active.rx_errors :
interface.network.active.tx_packets :
interface.network.active.tx_errors :
interface.network.active.protocol_error : None
cutter.
cutter.clean_cutter
line_print.
line_print.buffer_height : 2400 , Choices: 412-2400
apl.
apl.enable : none , Choices: none
apl.framework_version : 1.2
apl.version : none
apl.o.
apl.o.graphics_byte_width : 72 , Choices: 0-255
formats.
formats.cancel_all :
ezpl.
ezpl.print_width : 576 , Choices: 2-576
ezpl.media_type : mark , Choices: continuous,mark
ezpl.print_method : direct thermal , Choices: direct thermal
ezpl.tear_off : 0 , Choices: -120-120
ezpl.print_mode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator
ezpl.reprint_mode : off , Choices: on,off
ezpl.head_close_action : feed , Choices: feed,length,no motion
ezpl.power_up_action : no motion , Choices: feed,length,no motion
ezpl.label_length_max : 39 , Choices: 1.0-39.0
ezpl.manual_calibration : complete , Choices: inProgress,complete
ezpl.label_sensor : 70 , Choices: 0-255
ezpl.take_label : , Choices: 0-255
ezpl.restore_defaults, Choices: reload printer,reload network
alerts.
alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N
alerts.add
alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD, RIBBON AUTH ERROR, ODOMETER TRIGGERED
alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK
alerts.tracked_settings.
alerts.tracked_settings.zbi_notified :
alerts.tracked_settings.log_tracked :
alerts.tracked_settings.log :
alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000
alerts.tracked_settings.clear_log
alerts.http.
alerts.http.proxy :
alerts.http.logging.
alerts.http.logging.entries
alerts.http.logging.max_entries : 0 , Choices: 0-10000
alerts.http.logging.clear
alerts.http.authentication.
alerts.http.authentication.add
alerts.http.authentication.remove
alerts.http.authentication.entries :
weblink.
weblink.enable : off
weblink.printer_reset_required : no
weblink.restore_defaults
weblink.logging.
weblink.logging.entries
weblink.logging.max_entries : 0 , Choices: 0-10000
weblink.logging.clear
weblink.ip.
weblink.ip.conn1.
weblink.ip.conn1.location :
weblink.ip.conn1.retry_interval : 10 , Choices: 1-600
weblink.ip.conn1.proxy :
weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn1.authentication.
weblink.ip.conn1.authentication.add
weblink.ip.conn1.authentication.remove
weblink.ip.conn1.authentication.entries :
weblink.ip.conn1.test.
weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn1.num_connections : 0
weblink.ip.conn2.
weblink.ip.conn2.location :
weblink.ip.conn2.retry_interval : 10 , Choices: 1-600
weblink.ip.conn2.proxy :
weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100
weblink.ip.conn2.authentication.
weblink.ip.conn2.authentication.add
weblink.ip.conn2.authentication.remove
weblink.ip.conn2.authentication.entries :
weblink.ip.conn2.test.
weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest
weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both
weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800
weblink.ip.conn2.num_connections : 0
weblink.cloud_connect.
weblink.cloud_connect.enable : on , Choices: on,off
weblink.cloud_connect.connect
weblink.cloud_connect.status : NOT ACTIVE
weblink.cloud_connect.connection_key : 0000000000
weblink.cloud_connect.configuration_key : 0000000000
weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete
weblink.zebra_connector.
weblink.zebra_connector.version : 0.04
weblink.zebra_connector.enable : on , Choices: on,off
weblink.zebra_connector.proxy :
weblink.zebra_connector.authentication.
weblink.zebra_connector.authentication.add
weblink.zebra_connector.authentication.remove
weblink.zebra_connector.authentication.entries :
capture.
capture.channel1.
capture.channel1.port : off , Choices: usb,bt,off
capture.channel1.delimiter :
capture.channel1.max_length : 1000 , Choices: 1-3000
capture.channel1.count : 0 , Choices: 0-4294967295
capture.channel1.data.
capture.channel1.data.raw :
capture.channel1.data.mime :
nfc.
cradle.
ribbon.
""
Hi Mina,
Please, download Zebra Setup Utilities from the link below, then follow the directions of the second link.
Link to download the Zebra Setup Utilities Tool (ZSU)
Printer Setup Utilities | Zebra
Directions to run "allcv"
Zebra Technologies - Using the SGD Allcv Command to return the Super Host Status
Thanks,
MC
Hi Manuel ,
I already downloaded it but my printer didn't appear in the printers list ,How does i make it appear.
Thank you
Hi Mina,
Please, could you attach the "allcv" of your printer to the reply, so I can recommend what steps you can follow to avoid this behavior.
If you are no familiar with the "allcv" report , please, read article on the link below.
Zebra Technologies - Using the SGD Allcv Command to return the Super Host Status
Thanks,
MC