I have some simple strings that I am sending to print to a 105SL+ 203dpi printer
I have given that code to a partner and we are trying to get it to work on their printer 105SL+300dpi printer.
When they print using the parameters that I am sending, everything it shrunk and in the corner on the label.
I tried increasing the Label Length and Print Width parameters but it did not help.
Unfortunately, the other printer is not local to me so I cannot easily "test" parameter changes; and I am not very familiar with the printer parameters that would help re-adjust the sizing of the print on the label.
Here is what I have (written in C# and sending strings to the Printer using an eithernet port connection)
//Start new Label
//Set Printer Date/time
PrinterPort.Send("^ST" + ZebraDateString + ",M");
//Set reference datum, length and width of label
//Set DATE Human Readable field of label 
//Set TIME Human Readable field of label 
// There is a number of other Print Line and print barcode type commands here - leaving out for ease of reading and time//
//PQ is the print quantity command for the zebra printer.
//XZ ends the print format.
PrinterPort.Send("^PQ" + sNumberOfLabels + ",0,0,Y^XZ");
What I don't know is if there is a Parameter setting on the Printers that I can change or if there is a parameter that I am sending that I need to change. I realize that the two models have different dots-per-inch capabilities, but I think I should be able to modify my code such that it will print out fulling on the labels for the 300dpi unit. This code is for a 5x4 size label
The Labels print filling out the entire space on my printer (105SL+203dpi) using the above code
The labels are printing small in the upper corner on the 105SL+ 300dpi using the above code
Attaching a photos of the labels printed using the above code on the 105SL+ 300dpi
Please would love some help or a point in the right direction. Thank you!