The MyMobiler for Android tool is a free remote control solution for Android devices which works well with all Zebra Android products via ADB. The download link for MyMobiler is http://mymobiler.com/. After installation, the client can be pushed to the device via the ADB connection using the menu option shown below:

 

mymobiler1.png

 

After installation, the client starts automatically on the device and requires one manual configuration step in order to change the display type from the default setting (2.Service) to  3.Other:

 

mymobiler2.png

 

Having made this change, the connect option in the PC menu can be selected and the device screen should be correctly shown on the PC display. In order to support Zebra device skins, the attached files can be installed as follows:

 

1.Unzip the supplied files into the \MyMobiler\skin folder (may need to create folder if not already existing)

 

2.The supplied HTA script skin selector.hta can be run in order to select the required device skin:

3. Click on the required device name to select and then press the ‘Apply Skin’ button to install

4. On the MyMobiler PC app, press Ctrl-Tab in order to toggle between the skinned display and the non-skinned display:

 

mymobiler4.png

5. Right click on the top left corner of the MyMobiler skinned display (i.e. outside the image of the device) in order to bring up the menu:

 

mymobiler5.png

6. Use the Zoom control to select the required size of the skinned device. In order to capture the skinned device image, use a screen clip tool such as Greenshot (http://getgreenshot.org/)

 

*** Updated Feb 16 to include rebranded Zebra device skins and TC8000 ***