Rho Elements 2.1.1.7 Scanner stops returning data

We are using the default scanning sample application from your website (http://docs.rhomobile.com/rhoelements/rhoelements2-webapps) and when we are scanning the attached bar codes, not all the data is returned.  For instance, scan one bar code and you see the type and then the value.  Scan a different bar code to get another type and value.  As you keep scanning the different bar codes, the application stops returning the information at different intervals, even though the scanner still turns on, and beeps an acknowledgement to the bar code read.

Peter Arcuri
Steven after investigating

Steven after investigating this we have found a glitch in the webapps sample code that is essentially the root cause of the issue. We will be updating the sample code in docs.RhoMobile in the near future with the corections. In the meantime please use the code below:

ScanCode.png

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Steven Scott
That seems to have corrected

That seems to have corrected our issue on the hand held.  We are merging the same changes into our code base and will be testing with QA again next week.  Thanks.

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Log in to post comments