GPRS APN with PAP/CHAP authentication

Hi Team,

Does anyone have an experience to connect ES400 to GPRS APN
with PAP/CHAP authentication ?
I tried to configure the connection (APN, username, password)
and set "SetGPRSAuthentication" registry in "HKLM\Software\Microsoft\RIL"
to "1"(PAP) / "2"(CHAP) / "3"(PAP/CHAP), but it couldn't connect.
I checked same configuration with MC75A6, it could connect successfully.
Any idea ?

Thanks,
Kubo
Anonymous (not verified)
The registry entry for ES400

The registry entry for ES400 is different but as far as I know it's still not working even in the latest builds.

The issue was being tracked under  SR EMBPD00022776  
Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Anthony Ambler
Valery is correct, this is

Valery is correct, this is currently not enabled in the ES400. Current plan is to have it available as a patch post Rev A.

Tony
Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Juan-Antonio Ma...
Sorry for the silly question

Sorry for the silly question but...
I assume the issue is that one cannot select either PAP or CHAP to be used, am I right?
If so, the obvious question is: which PPP protocol is ES400 using by default, PAP or CHAP?

I tested with MOVISTAR in Spain, which uses both PAP and CHAP, so it successfully connected.
But other providers allow just one protocol.

Imagine being doing a demo at a customer which happens to have chosen the "wrong" provider :( :( :(. I would be good knowing in advance if we had a chance or not :).

Thanks!
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Anonymous (not verified)
re this PAP/CHAP issue - has

re this PAP/CHAP issue - has it been fixed in BSP19.1?
Danon is eagerly waiting for this feature to complete the trial.

Thanks,
Valery
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Herbert De Jong
To have PAP - CHAP GPRS

To have PAP - CHAP GPRS authentication working on ES400 it has unfortunately the need of a  special  spinned OS.

The rev A OS for ES400 will not support PAP/CHAP, also devices leaving manufacturing and the rev A OS installed on them will not support PAP - CHAP.

As soon as the  OS image is considered rev A  there will be a seperate PAP/CHAP  OS compiled and it will be made available to TA  community ( and partners ).


Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Anonymous (not verified)
And what is timeframe for

And what is timeframe for this to happen?
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Juan Obregon
Do we have a fix for this

Do we have a fix for this issue yet?
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Don Khan
There is a fix for this, BSP

There is a fix for this, BSP 19.11, that will be available as a web download.  The expected posting date for this is October 22.
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Makoto Kubo
I will try BSP19.11.  Thank

I will try BSP19.11.  Thank you !!

Kubo
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


joseph boriotti
Kubo, ES400 and MC65 Rev "A"

Kubo,
ES400 and MC65 Rev "A" do not support PAP/CHAP. Rev "A1" due out late this year will, as well as a special web-only image we will post soon.
Joe B.
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Log in to post comments