RS507 Control of beep and LEDs

A customer is requesting some code samples depicting the method of sending commands to the RS507 for control of the beeper and the LEDs.  I currently do not have access to a DEV system to investigate the corresponding EMDK/SDK for this device.















If there are any code snippets out there depicting such controls, please provide.















Thanks in advance,







Don







Amoolya Srivalson
The attached zip file

The attached zip file contains code snippet to do feedback by beep, led on the rs507 from an MC device.
Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Bauer Dmitry
The attached zip file

Please, attached zip file with example.

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Darryn Campbell
@Bauer Dmitry, this is a

@Bauer Dmitry, this is a really old question - the original answer would have probably referred to our WM/WinCE devices and the SCAN_RSMSetAttribute call.  I guess you are looking for an Android API / sample - I suggest you start with https://techdocs.zebra.com/emdk-for-android/7-6/samples/notification/ - I am not 100% sure if the RS507 will work with that as it's designed for the newer RS6000 but it is a good place to start.

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Bauer Dmitry
solution:

// this.MyReader.Parameters.LocalFeedback = DisabledEnabled.Disabled;
Actions.RemoteFeedbackParams rm = new Actions.RemoteFeedbackParams();
rm.LEDPattern = Actions.LEDPATTERN.LED_PATTERN_LED1;
rm.BeepPattern = Actions.BEEPPATTERN.BEEP_PATTERN_FIVE_SHORT_LOW;
rm.LEDTime = 500;
rm.BeepTime = 500;
this.MyReader.Actions.DoRemoteFeedBack(rm);

Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Log in to post comments