Pairing the RS507 and the MC65 without PIN or with PIN

It is important to note that when pairing with BSP44 that you must enter PIN number quickly otherwise it will not pair. 

WIth BSP44 and the RS507 with firmware PAAACS00-005-R02D0 the procedure is as follows:

1.  Load the follwing as a reg file into the Application Folder

; BT Scanner settings for 41.400 / 44.00

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BarcodeReaderBT]
"Flags"=dword:00000000

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BarcodeReaderBT\Settings]
"PortName"="\$device\COM7"

2.  Click on the .reg file -> click on it to merge it.

3.  Warm boot the MC65

4.  Clean boot the RS507 - procedure -hold down the button on the back right and place battery in it until it beeps several times.

5.  To avoid having to enter a Pin number please scan Disable Bluetooth Authentication.

6.  On the MC65 tap on the MotoBtui and turn on Bluetooth. 

7.  Click on Pairing barcode icon -  This must be down after the RS507 is on

8.  Scan the pairing barcode.

If you want to pair it with having to enter a PIN then follow

1.  Load the follwing as a reg file into the Application Folder

; BT Scanner settings for 41.400 / 44.00

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BarcodeReaderBT]
"Flags"=dword:00000000

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BarcodeReaderBT\Settings]
"PortName"="\$device\COM7"

2.  Click on the .reg file -> click on it to merge it.

3.  Warm boot the MC65

4.  Clean boot the RS507 - procedure -hold down the button on the back right and place battery in it until it beeps several times.

6.  On the MC65 tap on the MotoBtui and turn on Bluetooth. 

7.  Click on Pairing barcode icon -  This must be down after the RS507 is on

8.  Scan the pairing barcode

9.  Enter the PIN (12345) very quickly prior to the light flashing on the RS507 going off