CA50 works well with our AP5131. And I try to demo with Cisco 1130, Direct call is OK but PTT doesn't work. Do you have any Hint? Thank you. - Jaehoon - [Korea]
Demo with Cisco 1130 but no PTT.// Expert user has replied. |
Back
Subscribe to email updates
Monthly updates from our Zebra development team, straight to your inbox.
3 Replies
Try setting that on 1130 -maybe thresholds can be increased if there is only one device: interface Dot11Radio0 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0 no power client local fragment-threshold 256 rts threshold 128 no dot11 qos mode no dot11 extension aironet world-mode dot11d country ES indoor
Hi Jaehoon,
"One to many broadcast via IP multicast"
Multicast must be enabled on infrastructure
Check this setting on the Cisco and you should be okay. Cheers, Mark
Once you have the Multicast enabled, we recommend the follow settings for best Walkie Talkie performance: Make sure DTIM value is set to 2 (This should be the default on Cisco gear) Set 1 and 2 Mbps as required data rates - set the other data rates as supported