All, I have a customer that wants to configure a device lock PIN so that their MC75's will require an unlock PIN after 30 minutes of inactivity. All of the devices will be set with the same 4-digit PIN. We're trying to use either XML provisioning or a REG file to do this. When we manually configure the password info in the Lock applet and then use RemCapture to grab the Registry changes, we're having a problem deploying the settings. After we apply the REG setting changes from RemCapture we get the prompt to enter the PIN, but the device says the PIN is incorrect. My guess is that there must be some seed key or hashing that is causing our intended PIN number to get changed. Has anyone been able to mass deploy a lock PIN successfully...either via a REG file or XML provisioning? Thanks, Ken
How to configure Device Lock PIN/Password// Expert user has replied. |
1 Replies
see this link think that explains that there are two keys generated on the device when device lock is enabled, your Remcapture will only see the user key am afraid. http://blog.enterprisemobile.com/2008/06/why-device-lock-pinpassword-mu…