CMM4 Integrated switch firmware

V Vernon Tindell 3 years 6 months ago
1 2 0

Is there a place to download the latest firmware for the EtherWAN switch?  I can't find it on EtherWAN's website, but I already have customers asking if they are using the latest load.  My switch's firmware version is behind what the manual references.  Any help would be appreciated.

Please Register or Login to post a reply

2 Replies

M Matt Mangriotis

Vernon - I don't know where to go to get the latest firmware yet (I have a question into Etherwan support), but I have attached the latest firmware (as of 3/19/10) and short instructions on how to install...  I will reply to this thread with a response once I get it. "To install firmware v1.80.0 (dated 3/19/2010) for the 14-port switch(Model 72129).  The enable command line to upgrade thru a TFTP server is as follows.

Switch#install image 10.132.21.173 flash.tgz reload

Please save the configuration before executing the command. It will take 3 to 4 minutes to complete the process.  In the end the switch will reboot itself.  The original switch configuration will not be erased in the process."

M Matt Mangriotis

duplicate post

CONTACT
Can’t find what you’re looking for?