A partner is using cable p/n 25-32465-26 to attach an LS2208 to a PSC Magellan's auxilliary port. For some reason the decoded data does not go through the Magellan. Does anyone know if there is a special setup required on either scanner in order to make this work? Thanks in advance.
Connect an LS2208 to Magellan 8300// Expert user has replied. |
3 Replies
Page B6 (390/440) in Product Reference Guide PSC / Datalogic Magellan 8100 / 8200: https://easeofaccess.scanning.datalogic.com/public/marketlit/Send.aspx?… Page B6 (490/548) in Product Reference Guide PSC / Datalogic Magellan 8300 / 8400: https://easeofaccess.scanning.datalogic.com/public/marketlit/Send.aspx?… So Pinout for AUX port on Magellan 8100 / 8200 / 8300 / 8400 series looks identical. I attach a document (unfortunately in German) we created a long time ago. You need a serial cable and the special Data Format required by the Magellan f.e. with special prefixes.
Datalogic/PSC Magellan 8100/8200/8300/8400
Handheld AUXPort
Motorola/Symbol LS/DSxx08
Pinout
1
-
-
2
6
CTS Magellan / RTS LSxx08
3
-
-
4
7
RTS Magellan / CTS LSxx08
5
4
RxD Magellan / TxD LSxx08
6
5
TxD Magellan / RxD LSxx08
7
-
-
8
2
Power
9
3
Ground
10
-
-
Check the port settings to match with scanner's one and try the configuration in the attached document . Riad
I have used this cable before on the LS4208 connected to a Magellan 2200VS. The cable worked well and the only considerations we needed to think about was the port settings on the Magellan scanner and we also had to set the RTS/CTS Option 1 from the manual. Regards Justin