I Can't Update firmware RFS 6000 from bootOS

D Danny Diaz 3 years 6 months ago
2 0 0

RFS6000 Boot> « on: July 06, 2011, 04:03:56 PM » Hello, I have a RFS600 to which you change the CPU to enter through HyperTerminal is the boot option> I need to update the firmware I have tried the following: BootOS (c) 2004-2008 Motorola Inc. All rights reserved. version 3.2.0.0-026D NO PCI Card Present, leaving PCI Block disabled Loading runtime image 1:

  No valid runtime image found.

BootOS 3.2.0.0-026D (r42887) Base MAC Address = 00:23:68:63:a0:c2 Management MAC Address = 00:23:68:63:a0:cc Board Serial Number = 10022520400010 PS2606 version 1, product type 2, generation 1, model 3, manuf 1059 FPGA firmware revision 1.22 MIPS ProcessorID 0.12.6.4 XLR CPU_ID 0x6: 2 MIPS cores at 1.00GHz, 2x256KB L2 cache, 1+1 security coproces sors NOR bootstrap version 8, checksum good boot>

boot> diag 1GbpsCCMP boot# show net  ipaddr 192.168.0.103  mask 255.255.255.0  gateway 192.168.0.100  vlan 1  device UP1  mac 00:23:68:63:a0:cc boot#

I try to use the command PROGFW and can not get the update starts

Have you any idea that can help

CONTACT
Can’t find what you’re looking for?