Team, Anyone know how extend the default time that the CS3070 stays on when it's powered up initially? Its about 30 seconds and the customer has a need to change this to maybe 5 minutes. Their issue is that if the device goes to Bluetooth sleep you have to press the + Key and then stop and start your application for it to re-pair or if the user accidentally presses the batwings it powers off and kills your session and you must press the batwings for it to power back on. You must exit out and enter back into the application and the default time of 30 seconds is to much of a short window. Cheers, Mark
Increasing Time on CS3070// Expert user has replied. |
3 Replies
Thanks. I've played with that setting as well but this does not affect the Blinking Blue LED when you first turn on the device. It appears you only have 30 seconds to initiate a pairing before it turns off again. Mark
The CS3070 has two sleep paramters in the config.ini file as follows: Sleep=120 - Sleep time when not paired
BTSleep=600 - Sleep time when paired to a host, Range 0 - 65535 seconds Increasing BTSleep will keep the CS3070 awake longer while paired
There is a 'sleep' parameter, set to 120 seconds by default. I cant see a barcode in the PRG to amend this, but you could edit the CONFIG.INI file on the 3070 to a longer duration.