Need specs for RFID antenna - RF1000-FL-EXTANT1

I am looking for what the specs are for the external antenna that connects to an RD5000 device.

Part#: RF1000-FL-EXTANT1

I would appreciate if anyone can provide me with a document for this antenna.
Serge Larose
Good morning Justin, any luck

Good morning Justin, any luck with your request?

I have a customer that is asking for the same info and I cannot found it.

Serge

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Justin Salvage
Serge, I was told by

Serge,

I was told by engineering (I do not have a reference by name) a while back that the specs for this antenna are the same as the specs for the (internal) antenna already integrated on the RD5000 device.  These specs can be located on page 216 of 228 in the RD5000 Integrators Guide (link below).

RFID

Standards Supported    EPC Generation 2 UHF

Nominal read range          10 ft./3.04 m with the RFX6000 4x4 tag optimally oriented.

Field                             Half read range beam width: +/- 80 degrees (with tags optimally oriented).

Antenna                        Integrated, circularly polarized, 1.5 dB effective linear gain per axis (nominal); Antenna port for future support of optional external antenna.

Frequency Range          902-928 MHz

Output power                1W conducted (1.4W EIRP with integrated antenna)

Vote: 
Vote up!
Vote down!

Points: 1

You voted ‘up’


Serge Larose
The problem is that it do not

The problem is that it do not provide the size and space needed for inatallation.

Serge
Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Log in to post comments