Using BSP37, ImagerSample demo and Colour Camera API for MPA 2.0, on a MC75A6 (actually, on a few units), I always get pictures with a most bizarre colouring, as seen on the attached file. What am I doing wrong? Thanks!
Psychedelic colours using imager API on MC75A6 |
5 Replies
There are some camera fixes in BSP41. I saw similar problems in BSP37 and the update addressed the issue
This issue was first reported on BSP23 and solved under SPR 19413, the fix is part of BSP37 - 41, only occasions where I have seen something similar on BSP37 or 41 was when deploying the imager drivers cab file , did you deploy the drivers on top of BSP37 in your case ? if yes , try to clean boot and blank the terminal then deploy only the imager sample .
Installing the hot fix mentioned by Valery did solve the problem, thanks to you all!
looks like SPR 19413. While it was for BSP 23 I have not seen it being fixed on BSP37 SPR 19556 is combined fix for several camera/imaging issues. both are posted on support.symbol.com in hotfixes section. worth to try.
Spasiva, Valery!