Has anyone successfully downgraded from KK to JB? I need to downgrade my one and only MC40 back to JB but have been unable to. I get the following:
Finding update package...
Opening update package...
Verifying update package...
Stop update, check_hw() return false
Installation aborted.
Here's some additional information regarding attempts to downgrade my device back to JB. I tried loading the following JB packages:
M40N0JXXVRUxx20520.zip
M40N0JXX0RUxx20520.zip
M40N0JXXVRUxx30208.zip
M40N0JXX0RUxx30208.zip (this is what was loaded prior to upgrading to KK)
I get the following error when attempting to load either version of the 0208 image:
Finding update package...
Opening update package...
Verifying update package...
Stop update, check_hw() return false
Installation aborted.
I get the following error when attempting to load M40N0JXXVRUxx20520.zip:
Finding update package...
Opening update package...
Verifying update package...
Using built-in update-binary to update
assert failed: getprop("ro.motosln.feature.voice"
) == "true"
Installation aborted.
I get the following error when attempting to load M40N0JXX0RUxx20520.zip:
Finding update package...
Opening update package...
Verifying update package...
Using built-in update-binary to update
assert failed: getprop("ro.motosln.feature.voice"
) == "none"
Installation aborted.
I tried loading the packages via adb sideload and Recovery Mode. No problems upgrading to KK. My device hardware config shows a Touch of "Novatech." So I followed David's procedure for that type. I also loaded the optional "recovery-update-voice-kk.zip."
One question I have is regarding the MFD on my device. It shows "MFD: 13NOV12 MVKS." Can this be the root cause?
Points: 0
You voted ‘up’
Hi Tom,
Could you please let us know the KK OS version you are using? In latest build, downgrade is working fine. Also, after downgrade, we need to perfom a factory reset as well.
Regards,
-Bijosh.
Points: 0
You voted ‘up’
Hi Bijosh,
This is what is currently loaded on my MC40:
90-4AJ22-K-0010-0002-V0-M1-041615
Points: 0
You voted ‘up’
I see the same issue as what Tom is reporting.
Points: 0
You voted ‘up’
Issue was reproduced as engineering side and fix is ready as of 051515.
Points: 0
You voted ‘up’
Is a fix available for the downgrade issue that Tom reported?
Points: 0
You voted ‘up’
Tom, Please let us know if you are able to downgrade to JB
Points: 0
You voted ‘up’
Yes, thanks Jimmy!
Points: 0
You voted ‘up’
Please advise where the link is posted to correct this issue? I have a customer experiencing same problem. Thanks,
Points: 0
You voted ‘up’
Chris,
From what I was told, there were JB to KK issues early on, but SW said you need to be on the latest BSP (060215) or newer first before trying to downgrade back to JB... please give that a shot and let us know.
David
Points: 0
You voted ‘up’