3 Replies Latest reply on Dec 19, 2017 7:47 AM by Samantha Corn

    Is it possible to use a cutter with RFID labels in Zebra ZT410?

    Sergey Potylitsin

      Is it possible to use a cutter with RFID labels in Zebra ZT410?

      Using ZPL forced the cutter to cut, but when pruning is delayed mark ago for encoding and falls off the shaft. Is there some solution?

        • Re: Is it possible to use a cutter with RFID labels in Zebra ZT410?
          Samantha Corn

          Hi Sergey,

           

          When you say ZPL forced the cutter to cut, what ZPL did you send to the printer to do that?

           

          Also, it may be an issue with your printer's settings. Could you please attach the allcv report of the printer? Here's a walkthrough on how to get that if you've never done it before.

            • Re: Is it possible to use a cutter with RFID labels in Zebra ZT410?
              Sergey Potylitsin

              Hi, Samantha.

               

              ZPL code:

              ^XA^MMC^PW831^LL0599^LSO^FT50,180

              ^BY3^BCN,200,N,N,N^FD7777777777777^FS

              ^FT600,145^AAN,30,10,^FD7777777777777^FS

              ^RS8,,800,5^RFW,H^FDA7777777777777F^FS

              ^RWH,H^FS^RR10^FS^PQ2^XZ

               

              allcv:

              bluetooth.

              bluetooth.discoverable : on , Choices: on,off

              bluetooth.friendly_name : 18J170300043

              bluetooth.version : 4.3.1

              bluetooth.date : 02/13/2015

              bluetooth.local_name : 18J170300043

              bluetooth.address : AC:3F:A4:5E:89:6B

              bluetooth.bluetooth_pin : *

              bluetooth.short_address : AC3FA45E896B

              bluetooth.radio_version : 2.1

              bluetooth.enable : on , Choices: on,off

              bluetooth.connected : no

              bluetooth.minimum_security_mode : 1 , Choices: 1,2,3,4

              bluetooth.connected_security_mode : nc

              bluetooth.bonding : on , Choices: on,off

              bluetooth.clear_bonding_cache

              bluetooth.enable_reconnect : iOS_only , Choices: off,iOS_only

              bluetooth.json_config_channel_enable : on , Choices: on,off

              bluetooth.page_scan_window : 60 , Choices: 15,60

              card.

              card.inserted : Not Inserted

              card.cisproc : Processed

              card.mfgid : 

              card.cardid : 

              card.fncode : 000c

              card.idtext1 : 

              card.idtext2 : 

              card.idtext3 : 

              card.idtext4 : 

              card.fcrbase : Not Detected

              card.fcrlist : NONE DETECTED

              card.defcfg : Not Detected

              card.cor : Not Present

              card.mac_addr : 00:00:00:00:00:00

              card.mac_raw : 000000000000

              card.enable : on , Choices: on,off

              comm.

              comm.baud : 9600 , Choices: 2400,4800,9600,14400,19200,28800,38400,57600,115200

              comm.data_bits : 8 , Choices: 7,8

              comm.parity : null , Choices: null,odd,even,n,o,e

              comm.stop_bits : 1 , Choices: 1,2

              comm.dsr : off

              comm.handshake : xon/xoff , Choices: xon/xoff,rts/cts,dsr/dtr

              head.

              head.latch : ok

              ip.

              ip.dhcp.

              ip.dhcp.enable : on , Choices: on,off

              ip.dhcp.cid_type : 1 , Choices: 0,1,2

              ip.dhcp.cid_prefix : 

              ip.dhcp.cid_value : 000000000000

              ip.dhcp.requests_per_session : 2 , Choices: 1-10

              ip.dhcp.request_timeout : 2 , Choices: 2-30

              ip.dhcp.session_interval : 10 , Choices: 0-60

              ip.dhcp.lease.

              ip.dhcp.lease.length : 0

              ip.dhcp.lease.time_left : 0

              ip.dhcp.lease.server : 0.0.0.0

              ip.dhcp.lease.last_attempt : 0

              ip.dhcp.cache_ip : off , Choices: on,off

              ip.dhcp.vendor_class_id : Zebra Technologies ZTC ZT410-203dpi ZPL

              ip.dhcp.user_class_id : 

              ip.dhcp.option12 : on , Choices: on,off

              ip.dhcp.option12_format : 

              ip.dhcp.option12_value : 18J170300043

              ip.dhcp.cid_enable : off , Choices: on,off

              ip.dhcp.cid_suffix : 000000000000

              ip.dhcp.cid_all : 000000000000

              ip.dhcp.arp_verify : on , Choices: on,off

              ip.dhcp.auto_provision_enable : on , Choices: on,off

              ip.dhcp.ntp.

              ip.dhcp.ntp.enable : off , Choices: on,off

              ip.dhcp.ntp.received_servers : 

              ip.ftp.

              ip.ftp.enable : on , Choices: on,off

              ip.ftp.execute_file : on , Choices: on,off

              ip.ftp.request_password : no , Choices: yes,no

              ip.lpd.

              ip.lpd.enable : on , Choices: on,off

              ip.tcp.

              ip.tcp.enable : on , Choices: on,off

              ip.tcp.nagle_algorithm : enabled , Choices: enabled,disabled

              ip.udp.

              ip.udp.enable : on , Choices: on,off

              ip.http.

              ip.http.enable : on , Choices: on,off

              ip.http.admin_name : admin

              ip.http.admin_password : *

              ip.http.port : 80

              ip.http.faq_url : http://support.zebra.com

              ip.http.custom_link_name : 

              ip.http.custom_link_url : 

              ip.smtp.

              ip.smtp.enable : on , Choices: on,off

              ip.smtp.server_addr : 0.0.0.0

              ip.smtp.domain : ZBRPrintServer.com

              ip.pop3.

              ip.pop3.enable : on , Choices: on,off

              ip.pop3.print_headers : off , Choices: on,off

              ip.pop3.verbose_headers : off , Choices: on,off

              ip.pop3.print_body : off , Choices: on,off

              ip.pop3.save_attachments : off , Choices: on,off

              ip.pop3.poll : 240 , Choices: 0-65535

              ip.pop3.username : 

              ip.pop3.password : *

              ip.pop3.server_addr : 0.0.0.0

              ip.pop3.print_attachments : off , Choices: on,off

              ip.snmp.

              ip.snmp.enable : on , Choices: on,off

              ip.snmp.get_community_name : *

              ip.snmp.set_community_name : *

              ip.snmp.create_mib

              ip.snmp.trap_community_name : public

              ip.telnet.

              ip.telnet.enable : on , Choices: on,off

              ip.telnet.disconnect

              ip.addr : 0.0.0.0

              ip.netmask : 255.255.255.0

              ip.gateway : 0.0.0.0

              ip.port : 6101

              ip.remote : 

              ip.ping_remote

              ip.netstat : Active Internet connections

              Proto Recv-Q Send-Q  Local Address          Foreign Address        State

              udp        0      0  *.*                    *.*                  

               

               

               

              ip.remote_port : 10013

              ip.remote_autoconnect : off , Choices: on,off

              ip.bootp.

              ip.bootp.enable : on , Choices: on,off

              ip.mirror.

              ip.mirror.auto : off , Choices: on,off

              ip.mirror.username : user

              ip.mirror.password : *

              ip.mirror.server : 127.0.0.1

              ip.mirror.path : Zebra

              ip.mirror.freq : 0 , Choices: 0-65535

              ip.mirror.fetch

              ip.mirror.version : Nov 18 2015 17:11:57

              ip.mirror.freq_hours : 0 , Choices: 0-100

              ip.mirror.error_retry : 0 , Choices: 0-65535

              ip.mirror.feedback.

              ip.mirror.feedback.auto : off , Choices: on,off

              ip.mirror.feedback.path : Zebra/feedback

              ip.mirror.feedback.freq : 0 , Choices: 0-65535

              ip.mirror.feedback.odometer : 0 , Choices: 0-4294967295

              ip.mirror.success : no

              ip.mirror.success_time : Dec 19 2017 09:45:00

              ip.mirror.last_time : Dec 19 2017 09:45:00

              ip.mirror.last_error : No Error

              ip.mirror.mode : ftp , Choices: ftp,sftp

              ip.mirror.reset_delay : 5 , Choices: 0-900

              ip.mirror.interface : both , Choices: both,wired,wireless

              ip.mirror.appl_path : 

              ip.ping_len : 56 , Choices: 56-65535

              ip.dns.

              ip.dns.domain : 

              ip.dns.servers : 

              ip.discovery.

              ip.discovery.enable : on , Choices: on,off

              ip.discovery.port : 4201

              ip.roam_packet : on , Choices: on,off

              ip.arp_interval : 0 , Choices: 0-30

              ip.primary_network : 1 , Choices: 1

              ip.active_network : unknown

              ip.ntp.

              ip.ntp.enable : off , Choices: on,off

              ip.ntp.servers : 

              ip.ntp.log

              ip.port_alternate : 9100

              ip.port_json_config : 9200

              ip.port_single_conn : 9300

              ip.port_single_conn_idle_timeout : 180 , Choices: 0-3600

              label.

              media.

              media.status : ok

              media.sense_mode : gap , Choices: bar,gap

              media.tof : 0 , Choices: -400.0-128.0

              media.type : label , Choices: label,journal

              media.printmode : cutter , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear

              media.speed : 6.0 , Choices: 2.0-14.0

              media.thermal_mode : DT , Choices: DT,TT

              sensor.

              sensor.paper_supply : ok

              sensor.peeler_present : Not Present

              sensor.cover_open : yes

              wlan.

              wlan.operating_mode : infrastructure , Choices: ad hoc,infrastructure

              wlan.essid : 125

              wlan.current_essid : 

              wlan.station_name : ZEBRA

              wlan.current_tx_rate : 1.0

              wlan.encryption_mode : off , Choices: off,40-bit,128-bit

              wlan.associated : no

              wlan.encryption_index : 1 , Choices: 1,2,3,4

              wlan.encryption_key1 : *

              wlan.encryption_key2 : *

              wlan.encryption_key3 : *

              wlan.encryption_key4 : *

              wlan.leap_mode : off , Choices: on,off

              wlan.leap_username : 

              wlan.leap_password : *

              wlan.power_save : off , Choices: on,off

              wlan.auth_type : open , Choices: open,shared

              wlan.preamble : long , Choices: long,short

              wlan.bssid : 00:00:00:00:00:00

              wlan.firmware_version : 00.00.00

              wlan.signal_strength : 0

              wlan.poor_signal_threshold : 0 , Choices: 0-100

              wlan.international_mode : off , Choices: on,off

              wlan.roam.

              wlan.roam.signal : 40 , Choices: 1-75

              wlan.roam.interval : 5 , Choices: 5-255

              wlan.roam.interchannel_delay : 400 , Choices: 10-30000

              wlan.roam.max_chan_scan_time : 100 , Choices: 10-500

              wlan.roam.rssi : 80 , Choices: 60-125

              wlan.roam.max_fail : 10 , Choices: 2-75

              wlan.roam.monitor : off , Choices: off,print,serial,file

              wlan.channel_mask : 0x3FFF , Choices: 14 bits

              wlan.channel : 

              wlan.wpa.

              wlan.wpa.enable : off , Choices: off,on

              wlan.wpa.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast

              wlan.wpa.psk : *

              wlan.wpa.wpa_version : none

              wlan.wpa.groupkey_ciphersuite : NONE

              wlan.wpa.pairwise_ciphersuite : NONE

              wlan.8021x.

              wlan.8021x.enable : off , Choices: off,on,wpa

              wlan.8021x.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast

              wlan.8021x.ttls_tunnel : pap , Choices: pap,chap,mschap,mschapv2

              wlan.8021x.peap.

              wlan.8021x.peap.peap_username : 

              wlan.8021x.peap.peap_password : *

              wlan.8021x.peap.privkey_password : *

              wlan.8021x.peap.validate_server_certificate : on , Choices: on,off

              wlan.8021x.eap.

              wlan.8021x.eap.username : 

              wlan.8021x.eap.password : *

              wlan.8021x.eap.privkey_password : *

              wlan.adhocchannel : 1 , Choices: 1,2,3,4,5,6,7,8,9,10,11

              wlan.adhocautomode : off , Choices: on,off

              wlan.enable : on , Choices: on,off

              wlan.encryption_optional : no , Choices: yes,no

              wlan.adhoc_last_channel

              wlan.secure_ssid : off , Choices: on,off

              wlan.ip.

              wlan.ip.addr : 0.0.0.0

              wlan.ip.netmask : 255.255.255.0

              wlan.ip.gateway : 0.0.0.0

              wlan.ip.port : 6101

              wlan.ip.arp_interval : 0 , Choices: 0-30

              wlan.ip.dhcp.

              wlan.ip.dhcp.requests_per_session : 2 , Choices: 1-10

              wlan.ip.dhcp.request_timeout : 2 , Choices: 2-30

              wlan.ip.dhcp.session_interval : 10 , Choices: 0-60

              wlan.ip.dhcp.lease.

              wlan.ip.dhcp.lease.length : 0

              wlan.ip.dhcp.lease.time_left : 0

              wlan.ip.dhcp.lease.server : 0.0.0.0

              wlan.ip.dhcp.lease.last_attempt : 0

              wlan.ip.dhcp.cache_ip : off , Choices: on,off

              wlan.ip.dhcp.cid_type : 1 , Choices: 0,1,2

              wlan.ip.dhcp.cid_prefix : 

              wlan.ip.dhcp.cid_enable : off , Choices: on,off

              wlan.ip.dhcp.cid_suffix : 000000000000

              wlan.ip.dhcp.cid_all : 000000000000

              wlan.ip.dhcp.option12 : on , Choices: on,off

              wlan.ip.dhcp.option12_format : 

              wlan.ip.dhcp.option12_value : 18J170300043

              wlan.ip.dhcp.arp_verify : on , Choices: on,off

              wlan.ip.protocol : all , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent

              wlan.ip.default_addr_enable : on , Choices: off,on,saved_ip

              wlan.ip.timeout.

              wlan.ip.timeout.enable : on , Choices: on,off

              wlan.ip.timeout.value : 300 , Choices: 1-3600

              wlan.ip.dns.

              wlan.ip.dns.domain : 

              wlan.ip.dns.servers : 

              wlan.ip.wins.

              wlan.ip.wins.addr : 0.0.0.0

              wlan.ip.wins.permanent_source : off , Choices: on,off

              wlan.ip.port_alternate : 9100

              wlan.ip.port_json_config : 9200

              wlan.keep_alive.

              wlan.keep_alive.enable : on , Choices: on,off

              wlan.keep_alive.timeout : 15 , Choices: 5-300

              wlan.wep.

              wlan.wep.index : 1 , Choices: 1,2,3,4

              wlan.wep.auth_type : open , Choices: open,shared

              wlan.wep.key_format : hex , Choices: hex,ascii

              wlan.wep.key1 : *

              wlan.wep.key2 : *

              wlan.wep.key3 : *

              wlan.wep.key4 : *

              wlan.security : none , Choices: none,wep 40-bit,wep 128-bit,eap-tls,eap-ttls,eap-fast,peap,leap,wpa psk,wpa eap-tls,wpa eap-ttls,wpa eap-fast,wpa peap,wpa leap

              wlan.private_key_password : *

              wlan.username : 

              wlan.password : *

              wlan.mac_addr : 00:00:00:00:00:00

              wlan.mac_raw : 000000000000

              wlan.11n.

              wlan.11n.greenfield : on , Choices: on,off

              wlan.11n.short_gi_40mhz : off , Choices: on,off

              wlan.11n.short_gi_20mhz : off , Choices: on,off

              wlan.11n.rifs : off , Choices: on,off

              wlan.11n.20mhz_only : on , Choices: on

              wlan.11n.amsdu : off , Choices: on,off

              wlan.region_code : not available

              wlan.country_code : no region code , Choices: no region code

              wlan.user_channel_list : all , Choices: 1,2,3,4,5,6,7,8,9,10,11,all

              wlan.allowed_band : all , Choices: 2.4,5,all

              wlan.waveagent.

              wlan.waveagent.enable : off , Choices: on,off

              wlan.waveagent.udp_port : 18100 , Choices: 1-64000

              wlan.permitted_channels : 1,2,3,4,5,6,7,8,9,10,11

              wlan.active_channels : 1,2,3,4,5,6,7,8,9,10,11

              wlan.11d.

              wlan.11d.enable : off , Choices: on,off

              wlan.11d.current_country : not available

              wlan.11d.discovered_channels : not available

              wlan.authenticated : no

              wlan.available : no

              wlan.authentication_error : none

              wlan.regulatory_data_version : 1.9

              wlan.rts_cts_enabled : off , Choices: on,off

              display.

              display.contrast : 10 , Choices: 3-15

              display.text :                        РџР Р˜РќРўР•Р  ГОТОВ                  0.0.0.0                                                В                  

              display.backlight : on , Choices: on,off

              display.orientation : normal , Choices: normal

              display.backlight_on_time : 0 , Choices: 0-8191

              display.suppress_all_alerts : off , Choices: on,off

              display.status_bar_suppress : off , Choices: on,off

              display.language : russian , Choices: english,spanish,french,german,italian,norwegian,portuguese,swedish,danish,spanish2,dutch,finnish,japanese,korean,simp chinese,trad chinese,russian,polish,czech,romanian

              display.load_card : Z:INDEX.WML

              display.root_wml : INDEX.WML

              display.previous_displayed_card : Z:INDEX.WML#DoMainNet

              display.password.

              display.password.current : * , Choices: 0-9999

              display.password.input

              display.password.length : 4 , Choices: 4-4

              display.password.type : numeric , Choices: numeric

              display.password.level : none , Choices: selected,all,none

              memory.

              memory.flash_size : 67108864 Bytes

              memory.ram_size : 4194304 Bytes

              memory.flash_free : 66662400 Bytes Free

              memory.ram_free : 4171776 Bytes Free

              power.

              file.

              file.dir :

              - DIR *:*.*

              * E:IMAGES.TTF     13428         

              * E:TAGHELVB.TTF     32908         

              * E:TAGHELVR.TTF     32952         

              * E:TFUTURA.TTF     43072         

              * E:THERMES.TTF     46076         

              * E:TLIGHT.TTF     40260         

              * E:TT0003M_.TTF    169188  P      

              * E:UNIV25Y.FNT     10038         

              * E:UNIV2Z.FNT      9520         

              * E:UNIV35W.FNT     14596         

              * E:UNIV3X.FNT     12628         

              * E:UNIV4V.FNT     18062         

              * Z:0.TTF    125904  P    0 

              * Z:A.FNT      6839  P    A 

              * Z:ALERTCFG.NRD      5051  P      

              * Z:AZTEC.BAR         0  P      

              * Z:B.FNT      7746  P    B 

              * Z:BLUETOOTH.WML      7938  P      

              * Z:BLUETOOTH420.BMP       400  P      

              * Z:BLUETOOTH_ICON.BMP       128  P      

              * Z:BLUETOOTH_NOT_AVAILABLE_ICON.BMP       128  P      

              * Z:CODABAR.BAR         0  P      

              * Z:CODABLK.BAR         0  P      

              * Z:CODE11.BAR         0  P      

              * Z:CODE128.BAR         0  P      

              * Z:CODE39.BAR         0  P      

              * Z:CODE49.BAR         0  P      

              * Z:CODE93.BAR         0  P      

              * Z:D.FNT     10648  P    CD

              * Z:DATA_BLANK_ICON.BMP       128  P      

              * Z:DATA_ICON.BMP       128  P      

              * Z:DISPLYQR.WML      2996  P      

              * Z:DOWN_ARROW_ICON.BMP       122  P      

              * Z:E12.FNT     15691  P      

              * Z:E24.FNT     47056  P      

              * Z:E6.FNT      8520  P      

              * Z:E8.FNT     10893  P    E 

              * Z:EAN-13.BAR         0  P      

              * Z:EAN-8.BAR         0  P      

              * Z:EPL1.FNT     17718  P      

              * Z:EPL2.FNT     20918  P      

              * Z:EPL3.FNT     24118  P      

              * Z:EPL300-1.FNT     24118  P      

              * Z:EPL300-2.FNT     30518  P      

              * Z:EPL300-3.FNT     51318  P      

              * Z:EPL300-4.FNT     72686  P      

              * Z:EPL300-5.FNT    107958  P      

              * Z:EPL4.FNT     32870  P      

              * Z:EPL5.FNT     58038  P      

              * Z:EPL6.FNT      8498  P      

              * Z:EPL7.FNT      8928  P      

              * Z:ETHERNET_ICON.BMP       128  P      

              * Z:F.FNT     13275  P    F 

              * Z:G.FNT     49663  P    G 

              * Z:GS.FNT      5470  P    ? 

              * Z:H12.FNT     11536  P      

              * Z:H24.FNT     30436  P      

              * Z:H6.FNT      7247  P      

              * Z:H8.FNT      7825  P    H 

              * Z:HOMEMENU.WML      2664  P      

              * Z:I2OF5.BAR         0  P      

              * Z:IDMATRIX.BAR         0  P      

              * Z:IND2OF5.BAR         0  P      

              * Z:INDEX.WML     10189  P      

              * Z:LANGUAGE.BMP       400  P      

              * Z:LANGUAGE.WML     13946  P      

              * Z:LOGMARS.BAR         0  P      

              * Z:LOGO.PNG     20154  P      

              * Z:MAXICODE.BAR         0  P      

              * Z:MEDIA_BLANK_ICON.BMP       128  P      

              * Z:MEDIA_ICON.BMP       128  P      

              * Z:MIB200.TXT     46572  P      

              * Z:MICROPDF.BAR         0  P      

              * Z:MONOBD15.FNT      5570  P      

              * Z:MSICODE.BAR         0  P      

              * Z:NETWORK.BMP       400  P      

              * Z:NETWORK.WML     30998  P      

              * Z:NJ20WGL4.FNT    359678  P      

              * Z:NK20WGL4.FNT    710064  P      

              * Z:NS20WGL4.FNT   1248664  P      

              * Z:NT20WGL4.FNT    847138  P      

              * Z:ONEDOT.BMP        58  P      

              * Z:P.FNT       116  P    P 

              * Z:PASSWORD.WML      1304  P      

              * Z:PDF417.BAR         0  P      

              * Z:PLANETCD.BAR         0  P      

              * Z:PLESSEY.BAR         0  P      

              * Z:PORTS.BMP       400  P      

              * Z:PORTS.WML      8024  P      

              * Z:POSTNET.BAR         0  P      

              * Z:Q.FNT       116  P    Q 

              * Z:QCKCNTDO.WML      3598  P      

              * Z:QCKCNTMK.WML      2673  P      

              * Z:QRCODE.BAR         0  P      

              * Z:R.FNT       116  P    R 

              * Z:REGDB.NRD     86040  P      

              * Z:REPRINT.NRD         3  P      

              * Z:RESETNET.NRD         3  P      

              * Z:RFID.BMP       400  P      

              * Z:RFID.WML     27455  P      

              * Z:RFIDRCPE.XML     32780  P      

              * Z:RFID_HOP.XML     15164  P      

              * Z:RIBBON_IN_ICON.BMP       126  P      

              * Z:RIBBON_OUT_ICON.BMP       128  P      

              * Z:RSS.BAR         0  P      

              * Z:S.FNT       116  P    S 

              * Z:S2OF5.BAR         0  P      

              * Z:SENSORS.BMP       400  P      

              * Z:SENSORS.WML     10293  P      

              * Z:SERVER        20  P      

              * Z:SETTINGS.BMP       400  P      

              * Z:SETTINGS.WML     17071  P      

              * Z:SIGNAL_STRENGTH_0_BAR_ICON.BMP       128  P      

              * Z:SIGNAL_STRENGTH_1_BAR_ICON.BMP       128  P      

              * Z:SIGNAL_STRENGTH_2_BAR_ICON.BMP       128  P      

              * Z:SIGNAL_STRENGTH_3_BAR_ICON.BMP       128  P      

              * Z:SIGNAL_STRENGTH_4_BAR_ICON.BMP       128  P      

              * Z:SPACE10.BMP       222  P      

              * Z:SPACE17.BMP       222  P      

              * Z:SPACE20.BMP       222  P      

              * Z:SPACE34.BMP       382  P      

              * Z:T.FNT       116  P    T 

              * Z:TELNET.WML     16941  P      

              * Z:TLC39.BAR         0  P      

              * Z:TOOLS.BMP       400  P      

              * Z:TOOLS.WML     50200  P      

              * Z:U.FNT       116  P    U 

              * Z:UIF.SS     11596  P      

              * Z:UPC-A.BAR         0  P      

              * Z:UPC-E.BAR         0  P      

              * Z:UPC-EAN.BAR         0  P      

              * Z:UP_ARROW_ICON.BMP       122  P      

              * Z:UTT.SS     11588  P      

              * Z:V.FNT       116  P    V 

               

               

              -   4171776 bytes free R: RAM

              -  66662400 bytes free E: ONBOARD FLASH

               

              file.type : "?"

              file.delete

              file.print

              file.run

              file.rename

              file.dir_format : zpl , Choices: zpl

              file.drive_info

              file.drive_listing

              odometer.

              odometer.user_label_count : 87 , Choices: 0-4294967295

              odometer.user_label_count1 : 139662

              odometer.user_label_count2 : 139662

              odometer.total_label_count : 139662

              odometer.total_print_length : 351883 INCHES, 893785 CENTIMETERS

              odometer.latch_open_count : 563

              odometer.label_dot_length : 0

              odometer.media_marker_count : 141550

              odometer.media_marker_count1 : 351883 INCHES, 893785 CENTIMETERS

              odometer.media_marker_count2 : 351883 INCHES, 893785 CENTIMETERS

              odometer.headclean : 351883 INCHES, 893785 CENTIMETERS

              odometer.headnew : 351883 INCHES, 893785 CENTIMETERS

              odometer.rfid.

              odometer.rfid.valid_resettable : 217

              odometer.rfid.void_resettable : 91

              appl.

              appl.date : 11/18/2015

              appl.name : V75.19.15Z

              appl.version : 7519

              appl.bootblock : 7.5.6

              appl.link_os_version : 3.0

              device.

              device.reset

              device.restore_defaults, Choices: wlan,ip,display,power,bluetooth,all,device.alerts

              device.prompted_network_reset, Choices: yes,no

              device.friendly_name : 18J170300043

              device.company_name : Zebra Technologies

              device.product_name : ZT410R

              device.product_name_submodel : none

              device.company_contact : 

              device.location : 

              device.position.

              device.position.latitude : 0.000000 , Choices: -90.0-90.0

              device.position.longitude : 0.000000 , Choices: -180.0-180.0

              device.position.altitude : 0.000000 , Choices: -10000.0-406700000.0

              device.position.accuracy : 0.000000 , Choices: 0.0-406700000.0

              device.status : ready

              device.idle_display_format : fw version , Choices: fw version,ip address,mm/dd/yyyy 24 hr,mm/dd/yyyy 12 hr,dd/mm/yyyy 24 hr,dd/mm/yyyy 12 hr

              device.idle_display_value : V75.19.15Z

              device.sensor_select : transmissive , Choices: reflective,transmissive

              device.jobs_print : 0

              device.languages : epl_zpl , Choices: zpl,hybrid_xml_zpl,epl_zpl,epl

              device.cph_enable : off , Choices: on,off

              device.cph_interval : 0 , Choices: 0-65535

              device.macro_get : 

              device.user_p1 : 

              device.user_p2 : 

              device.uptime : 00 days 00 hours 08 mins 42 secs

              device.volume : high , Choices: high,medium,low,off

              device.local_menu_mode : off , Choices: off,on

              device.printhead.

              device.printhead.serialnum : 41000-71/1612-01954A

              device.printhead.coldwarning : 

              device.printhead.resolution : 8.0

              device.frontpanel.

              device.frontpanel.line1 : 

              device.frontpanel.line2 : 

              device.frontpanel.line3 : 

              device.frontpanel.line4 : 

              device.frontpanel.xml : <FRONT-PANEL>

              <STATUS-BAR>

              <BLUETOOTH>NOT-CONNECTED</BLUETOOTH>

              <WLAN>NOT-INSTALLED</WLAN>

              <SIGNAL-STRENGTH>NOT-INSTALLED</SIGNAL-STRENGTH>

              <MEDIA>MEDIA-PRESENT</MEDIA>

              <ETHERNET>NOT-CONNECTED</ETHERNET>

              <BATTERY-LEVEL>0-BAR</BATTERY-LEVEL>

              <LATCH>LATCH-CLOSED</LATCH>

              <ERROR>NO-PRINTER-ERROR</ERROR>

              </STATUS-BAR>

              <LCD>

              <LINE1></LINE1>

              <LINE2>РџР Р˜РќРўР•Р  ГОТОВ</LINE2>

              <LINE3></LINE3>

              <LINE4>0.0.0.0</LINE4>

              <LINE5></LINE5>

              </LCD>

              <NAVIGATION-BAR>

              <M1>ВЄ</M1>

              <M2></M2>

              <M3></M3>

              </NAVIGATION-BAR>

              </FRONT-PANEL>

              device.frontpanel.key_press

              device.unique_id : 18J170300043

              device.xml.

              device.xml.enable : on , Choices: on,off

              device.ff_disable : off , Choices: on,off

              device.pnp_option : zpl , Choices: zpl,epl

              device.pnp_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:ZPL;MODEL:ZTC ZT410R-203dpi ZPL;CLASS:PRINTER;OPTIONS:XML;

              device.download_connection_timeout : 0 , Choices: 0-65535

              device.print_reprogram_2key : on , Choices: on,off

              device.epl_legacy_mode : off

              device.host_identification : ZT410R-200dpi,V75.19.15Z,8,4096KB,CUTTER DETECTED

              device.host_status : 030,0,0,0196,000,0,0,0,000,0,0,0

              000,0,0,0,0,3,6,0,00000000,1,000

              1234,0

              device.super_host_status

              device.pause

              device.unpause

              device.ltu_installed : no

              device.cutter_installed : yes

              device.rewinder_installed : no

              device.bluetooth_installed : yes

              device.print_out_report, Choices: settings,network,formats,images,fonts,barcodes,all,sensor profile

              device.diagnostic_print : disabled , Choices: disabled,enabled

              device.job_log.

              device.job_log.total_jobs : 0

              device.internal_wired_setting_location : printserver , Choices: printer,printserver

              device.print_geometry_revision : 0

              device.user_vars.

              device.user_vars.create

              device.user_vars.set_range

              device.docked : 

              device.slot_1 : empty

              device.slot_2 : empty

              device.syslog.

              device.syslog.enable : off , Choices: off,on

              device.syslog.configuration : 

              device.syslog.save_local_file : no , Choices: no,yes

              device.syslog.log_max_file_size : 10000 , Choices: 10000-400000

              device.syslog.entries

              device.syslog.clear_log

              device.light.

              device.light.cover_open_brightness : high , Choices: off,low,medium,high

              device.light.head_open_brightness : high , Choices: off,low,medium,high

              device.feature.

              device.feature.mfi : present

              device.feature.mcr : not available

              device.feature.bluetooth_le : not present

              device.feature.nfc : not available

              device.alerts.

              device.alerts.audible : cover_open:high,media_out:high,battery_low:high,replace_battery:high,nfc_read:high,nfc_write:high,mcr_read:high

              device.pmcu.

              device.pmcu.revision : 

              device.pmcu.desired_revision : 

              input.

              input.capture : off , Choices: print,run,off

              print.

              print.tone : 15.0 , Choices: 0.0-30.0

              print.tone_format : zpl , Choices: zpl

              print.tone_zpl : 15.0 , Choices: 0.0-30.0

              mcr.

              rtc.

              rtc.time : 09:53:14

              rtc.date : 12-19-2017

              rtc.timezone : UTC00

              rtc.exists : yes

              usb.

              usb.device.

              usb.device.vendor_id : 0x0A5F

              usb.device.product_id : 0x0102

              usb.device.device_version : 1.1

              usb.device.product_string : ZTC ZT410R-203dpi ZPL

              usb.device.manufacturer_string : Zebra Technologies

              usb.device.serial_string : 18J170300043

              usb.device.device_id_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:ZPL;MODEL:ZTC ZT410R-203dpi ZPL;CLASS:PRINTER;OPTIONS:XML;

              usb.device.device_unique_id : on , Choices: on,off

              usb.connected : yes

              usb.halt : no , Choices: yes,no

              usb.host.

              usb.host.mass_storage_count : 0

              usb.host.hid_count : 0

              usb.host.lock_out : off , Choices: on,off

              usb.host.read_list : uninitialized , Choices: fill_store,store,fill_print,print,clear

              usb.host.read_list_print_delay : 0 , Choices: 0-65535

              usb.host.write_list : uninitialized , Choices: fill_store,store,clear

              usb.host.template_list : uninitialized , Choices: up,down,fill

              usb.host.template_print_amount : 1 , Choices: 1-99999

              usb.host.fn_field_list : uninitialized , Choices: up,down,fill,clear,clear_all,print,first,last

              usb.host.fn_last_field : no

              usb.host.fn_field_data : 

              usb.host.keyboard_input : on , Choices: on,off

              usb.mirror.

              usb.mirror.enable : on , Choices: on,off

              usb.mirror.auto : on , Choices: on,off,prompt

              usb.mirror.path : Zebra

              usb.mirror.fetch

              usb.mirror.error_retry : 0 , Choices: 0-65535

              usb.mirror.feedback.

              usb.mirror.feedback.auto : off , Choices: on,off

              usb.mirror.feedback.path : Zebra/feedback

              usb.mirror.feedback.odometer : 0 , Choices: 0-4294967295

              usb.mirror.success : no

              usb.mirror.success_time : 

              usb.mirror.last_time : 

              usb.mirror.last_error : No Error

              usb.mirror.reset_delay : 5 , Choices: 0-900

              usb.mirror.appl_path : 

              log.

              log.reboot.

              log.reboot.code : 11

              log.reboot.reason : Off key

              log.reboot.codes : bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

              log.reboot.report : Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

              Off key

               

              netmanage.

              netmanage.type : none , Choices: none,avalanche

              netmanage.status_code : 0

              netmanage.state_code : 0

              netmanage.error_code : 0

              netmanage.avalanche.

              netmanage.avalanche.model_name : 

              netmanage.avalanche.interval : 60000 , Choices: 0-4294967295

              netmanage.avalanche.startup_update : off , Choices: on,off

              netmanage.avalanche.interval_update : off , Choices: on,off

              netmanage.avalanche.agent_addr : 0.0.0.0

              netmanage.avalanche.available_agent : 0.0.0.0

              netmanage.avalanche.available_port : 1 , Choices: 1-65535

              netmanage.avalanche.encryption_type : 0 , Choices: 0-255

              netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295

              netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295

              netmanage.avalanche.terminal_id : 0 , Choices: 0-65535

              netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295

              netmanage.avalanche.text_msg.

              netmanage.avalanche.text_msg.print : off , Choices: on,off

              netmanage.avalanche.text_msg.display : off , Choices: on,off

              netmanage.avalanche.text_msg.beep : off , Choices: on,off

              netmanage.avalanche.set_property

              zbi.

              zbi.revision : ZBI Version 2.1

              zbi.state : off

              zbi.last_error : 

              zbi.program_list, Choices: up,down,fill,execute

              zbi.start_info.

              zbi.start_info.file_name : *:\.BAZ

              zbi.start_info.memory_alloc : 0

              zbi.start_info.execute

              zbi.control.

              zbi.control.terminate

              zbi.control.run

              zbi.control.break

              zbi.control.restart

              zbi.control.step

              zbi.control.variable_name : 

              zbi.control.variable_value : 

              zbi.control.add_breakpoint

              zbi.control.delete_breakpoint

              zbi.control.clear_breakpoints

              zbi.control.line_number : 0

              zbi.reseller_key

              zbi.key : DISABLED 

              zbi.running_program_name : 

              zbi.key_version : 1.1

              zpl.

              zpl.calibrate

              zpl.relative_darkness : 0 , Choices: -300-300

              zpl.save

              zpl.label_length : 196 , Choices: 0-32000

              zpl.left_position : 0 , Choices: -9999-9999

              zpl.zpl_override : disabled , Choices: disabled,enabled

              zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff

              zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff

              zpl.delimiter : , (2C) , Choices: 00-FF,00-ff

              zpl.zpl_mode : zpl II , Choices: zpl II,zpl

              zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000

              zpl.system_error : 0,0,00000000,00000000

              zpl.no_errors_boot_done : yes

              zpl.print_orientation : nor , Choices: nor,inv

              zpl.label_top : 0 , Choices: -120-120

              internal_wired.

              internal_wired.ip.

              internal_wired.ip.addr : 0.0.0.0

              internal_wired.ip.netmask : 255.255.255.0

              internal_wired.ip.gateway : 0.0.0.0

              internal_wired.ip.port : 6101

              internal_wired.ip.arp_interval : 0 , Choices: 0-30

              internal_wired.ip.dhcp.

              internal_wired.ip.dhcp.requests_per_session : 2 , Choices: 1-10

              internal_wired.ip.dhcp.request_timeout : 2 , Choices: 2-30

              internal_wired.ip.dhcp.session_interval : 10 , Choices: 0-60

              internal_wired.ip.dhcp.lease.

              internal_wired.ip.dhcp.lease.length : 0

              internal_wired.ip.dhcp.lease.time_left : 0

              internal_wired.ip.dhcp.lease.server : 0.0.0.0

              internal_wired.ip.dhcp.lease.last_attempt : 0

              internal_wired.ip.dhcp.cache_ip : off , Choices: on,off

              internal_wired.ip.dhcp.cid_type : 1 , Choices: 0,1,2

              internal_wired.ip.dhcp.cid_prefix : 

              internal_wired.ip.dhcp.cid_enable : off , Choices: on,off

              internal_wired.ip.dhcp.cid_suffix : 00074D733ECC

              internal_wired.ip.dhcp.cid_all : 00074D733ECC

              internal_wired.ip.dhcp.option12 : on , Choices: on,off

              internal_wired.ip.dhcp.option12_format : 

              internal_wired.ip.dhcp.option12_value : 18J170300043

              internal_wired.ip.dhcp.arp_verify : on , Choices: on,off

              internal_wired.ip.protocol : all , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent

              internal_wired.ip.default_addr_enable : on , Choices: off,on,saved_ip

              internal_wired.ip.timeout.

              internal_wired.ip.timeout.enable : on , Choices: on,off

              internal_wired.ip.timeout.value : 300 , Choices: 1-3600

              internal_wired.ip.dns.

              internal_wired.ip.dns.domain : 

              internal_wired.ip.dns.servers : 

              internal_wired.ip.wins.

              internal_wired.ip.wins.addr : 0.0.0.0

              internal_wired.ip.wins.permanent_source : off , Choices: on,off

              internal_wired.ip.port_alternate : 9100

              internal_wired.ip.port_json_config : 9200

              internal_wired.mac_addr : 00:07:4D:73:3E:CC

              internal_wired.mac_raw : 00074D733ECC

              internal_wired.auto_switchover : on , Choices: on,off

              internal_wired.installed : yes

              internal_wired.link : no

              internal_wired.activity_led : blink , Choices: blink,solid

              rfid.

              rfid.position.

              rfid.position.program : B22

              rfid.error.

              rfid.error.response : RFID Р’ РќРћР РњР•

              rfid.reader_1.

              rfid.reader_1.model : TM:M6E MICRO

              rfid.reader_1.hardware_version : 20.00.00.01

              rfid.reader_1.firmware_version : 01.03.00.18

              rfid.reader_1.antenna_port : A3 , Choices: A1,A2,A3,A4,B1,B2,B3,B4,C1,C2,C3,C4,D1,D2,D3,D4,E1,E2,E3,E4

              rfid.reader_1.power.

              rfid.reader_1.power.read : 22 , Choices: 0-30

              rfid.reader_1.power.write : 23 , Choices: 0-30

              rfid.tag.

              rfid.tag.test.

              rfid.tag.test.content : quick , Choices: read,write,quick

              rfid.tag.test.result_line1 : read ok

              rfid.tag.test.result_line2 : write ok

              rfid.tag.test.execute

              rfid.tag.calibrate, Choices: run,restore

              rfid.tag.read.

              rfid.tag.read.content : epc , Choices: epc,memory bank sizes,protocol bits,tid information,password status

              rfid.tag.read.result_line1 : no tag found

              rfid.tag.read.result_line2 : 

              rfid.tag.read.result_line1_alternate : none

              rfid.tag.read.result_line2_alternate : 

              rfid.tag.read.execute

              rfid.enable : on , Choices: off,on

              rfid.region_code : rest of world

              rfid.country_code : russia , Choices: not selected,europe,albania,bosnia,georgia,croatia,chile,colombia,costa rica,dominican republic,guatemala,mexico,nicaragua,peru,puerto rico,russia,saudi arabia,south africa,turkey,uae,vietnam,australia/nz,china,hong kong,singapore,malaysia,thailand,philippines,korea,taiwan,india,bangladesh,brazil,el salvador,indonesia,egypt

              rfid.hop_table_version : 2

              rfid.recipe_version : 2

              rfid.antenna_sweep : on , Choices: on,off

              rfid.adaptive_antenna : none , Choices: none,neighbors

              interface.

              interface.network.

              interface.network.settings_require_reset : no

              interface.network.active.

              interface.network.active.printserver : unknown

              interface.network.active.ip_addr : 0.0.0.0

              interface.network.active.netmask : 0.0.0.0

              interface.network.active.gateway : 0.0.0.0

              interface.network.active.protocol : all

              interface.network.active.default_addr_enable : on

              interface.network.active.wins_addr : 0.0.0.0

              interface.network.active.arp_interval : 0

              interface.network.active.mac_addr : 00:00:00:00:00:00

              interface.network.active.mac_raw : 000000000000

              interface.network.active.server_protocol : 

              interface.network.active.server_address : 0.0.0.0

              interface.network.active.dhcp_received_host_name : 

              interface.network.active.cable_type : unknown

              interface.network.active.speed : 0

              interface.network.active.rx_packets : 

              interface.network.active.rx_errors : 

              interface.network.active.tx_packets : 

              interface.network.active.tx_errors : 

              interface.network.active.protocol_error : None

              cutter.

              cutter.clean_cutter : off , Choices: on,off

              apl.

              apl.enable : none , Choices: none

              apl.framework_version : 1.2

              apl.version : none

              apl.o.

              apl.o.graphics_byte_width :  , Choices: 0-255

              formats.

              formats.cancel_all : 

              ezpl.

              ezpl.print_width : 831 , Choices: 2-832

              ezpl.media_type : gap/notch , Choices: continuous,gap/notch,mark

              ezpl.print_method : direct thermal , Choices: thermal trans,direct thermal

              ezpl.tear_off : 0 , Choices: -120-120

              ezpl.print_mode : cutter , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear

              ezpl.reprint_mode : off , Choices: off

              ezpl.head_close_action : no motion , Choices: calibrate,feed,length,no motion,short cal

              ezpl.power_up_action : no motion , Choices: calibrate,feed,length,no motion,short cal

              ezpl.label_length_max : 39 , Choices: 1.0-39.0

              ezpl.manual_calibration : complete , Choices: inProgress,complete

              ezpl.label_sensor : 204 , Choices: 0-255

              ezpl.take_label : 255 , Choices: 0-255

              ezpl.restore_defaults, Choices: reload printer,reload network

              alerts.

              alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N

              alerts.add

              alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD

              alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK

              alerts.tracked_settings.

              alerts.tracked_settings.zbi_notified : 

              alerts.tracked_settings.log_tracked : 

              alerts.tracked_settings.log : 

              alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000

              alerts.tracked_settings.clear_log

              alerts.http.

              alerts.http.proxy : 

              alerts.http.logging.

              alerts.http.logging.entries

              alerts.http.logging.max_entries : 0 , Choices: 0-10000

              alerts.http.logging.clear

              alerts.http.authentication.

              alerts.http.authentication.add

              alerts.http.authentication.remove

              alerts.http.authentication.entries : 

              weblink.

              weblink.enable : off

              weblink.printer_reset_required : no

              weblink.restore_defaults

              weblink.logging.

              weblink.logging.entries

              weblink.logging.max_entries : 0 , Choices: 0-10000

              weblink.logging.clear

              weblink.ip.

              weblink.ip.conn1.

              weblink.ip.conn1.location : 

              weblink.ip.conn1.retry_interval : 10 , Choices: 1-600

              weblink.ip.conn1.proxy : 

              weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100

              weblink.ip.conn1.authentication.

              weblink.ip.conn1.authentication.add

              weblink.ip.conn1.authentication.remove

              weblink.ip.conn1.authentication.entries : 

              weblink.ip.conn1.test.

              weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest

              weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both

              weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800

              weblink.ip.conn1.num_connections : 0

              weblink.ip.conn2.

              weblink.ip.conn2.location : 

              weblink.ip.conn2.retry_interval : 10 , Choices: 1-600

              weblink.ip.conn2.proxy : 

              weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100

              weblink.ip.conn2.authentication.

              weblink.ip.conn2.authentication.add

              weblink.ip.conn2.authentication.remove

              weblink.ip.conn2.authentication.entries : 

              weblink.ip.conn2.test.

              weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest

              weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both

              weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800

              weblink.ip.conn2.num_connections : 0

              weblink.cloud_connect.

              weblink.cloud_connect.enable : on , Choices: on,off

              weblink.cloud_connect.connect

              weblink.cloud_connect.status : NOT ACTIVE

              weblink.cloud_connect.connection_key : 0000000000

              weblink.cloud_connect.configuration_key : 0000000000

              weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete

              capture.

              capture.channel1.

              capture.channel1.port : off , Choices: serial,usb,bt,parallel,off

              capture.channel1.delimiter :

               

              capture.channel1.max_length : 1000 , Choices: 1-3000

              capture.channel1.count : 0 , Choices: 0-4294967295

              capture.channel1.data.

              capture.channel1.data.raw : 

              capture.channel1.data.mime : 

              nfc.

              cradle.

              ""