Unable to scan baroces with bigger lenght

Hello,

I am using Zebra TC25/TC20 device and unable to scan barcodes with greater width.

To check this issue go to https://www.barcodesinc.com/generator/index.php  and create a barcode with text  "MIS7308120200"

Now open default DWDemo app in device and try to can, you would be able to scan it.

Now create barcode using text "MIS73081202001011801268121", now try to scan using same DWDemo app, You won't be able to scan it.

Why so? Any help will be appreciated.

Thanks

Anonymous (not verified)
Hi, it should work.  Please

Hi, it should work.  Please check your the DWDemo profile for Code 128 has the maximum length set long enough (launch Datawedge, select DWDemo profile, scroll down to decoder params, select Code 128, check value of 'Length2')

You might also try printing the barcode out just to double check it's not some issue scanning from the monitor (it works on my TC20 but it's probably worth checking).

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Maulik Sakhare
Are you able to scan using

Are you able to scan using TC20?
Do I need to check for any other settings?

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Anonymous (not verified)
Another possibility, there

Another possibility, there are two imager engines available for TC20, SE2100 and SE4710 (Settings --> About Phone --> Hardware components).  You will see that the SE2100 has a smaller horizontal resolution, https://www.ptsmobile.com/zebra/tc20/tc20-integrator-guide.pdf

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Maulik Sakhare
value for length2 is 55, its

value for length2 is 55, its now working for me

Vote: 
Vote up!
Vote down!

Points: 0

You voted ‘up’


Log in to post comments