Hi, I´ve finally figure out
As you can see on page 52 of EPL2 Programming Guide, you can use B,p1,p2,p3,p4,p5,p6,p7,p8 command.
Where p4 may have values "E30", "E32" or "E35", the p6 should be equal to "N" and p5 may have any value from 2 to 4.
In case ZPL or ZPL2 language supported in your printer I would recommend you to switch from use of EPL to use of ZPL.
Software Engineer, Kutir Mobility
Posted on behalf of Zebra Technologies