Label Printing on Zebra using ZPL command

Label Printing on Zebra using ZPL command

Label Printing on Zebra using ZPL command


Audience

With the reference to previous post: https://developer.zebra.com/forum/26013 - we have implemented the clear buffer, and our responses are coming properly in line - however our speed is still quite slow in comparison to bartender, is there any other method for us to optimize this? we are only encoding 96 bits of data - it takes about 1.4 seconds per tag, with bartender it takes less than a second per tag is there any other method for us to optimize this?

Submitted by priya@tagid.co.in on April 19, 2021 Permalink

We are facing another challenge now - that with the same labels and same model of printer, we are getting different behavior. For 1 printer, we set the thread time to 1650 and the other printer 3500 to get an accurate response.>> this is resolved now

Submitted by SSi1 on April 14, 2021 Permalink

Hi Priya, The 1.4 seconds per RFID tag is probably the shortest time we can get with SendAndWaitForResponse() API. To shorten the time further, I am afraid that we will have to use Connection.Write() and Connection.Read() directly instead.