10 Replies Latest reply on May 26, 2017 12:37 PM by Samantha Corn

    Pdf print

    Mina Mohsen

      Please help me , Iam using the zebra IMZ320 printer to print pdf as image from android application , and the printer print the pdf successfully but it print some blank feed in the end of paper although i send the command with ^LL height of the image , what is wrong ??

        • Re: Pdf print
          Manuel Caicedo-Rivera

          Hi Mina,

           

          Please, could you attach the "allcv" of your printer to the reply, so I can recommend what steps you can follow to avoid this behavior.

           

          If you are no familiar with the "allcv" report , please, read article on the link below.

           

          Zebra Technologies - Using the SGD Allcv Command to return the Super Host Status

           

          Thanks,

           

          MC

            • Re: Pdf print
              Mina Mohsen

              Hi Manuel,

              Really thanks for your replay and i am sorry for being late , but i can't understand how to get the "allcv" report of my printer , do i need to connect my printer to my lab top and user Zebra setup Utility programme to get this report or i can get it from the installed driver of my printer template ??

            • Re: Pdf print
              Manuel Caicedo-Rivera

              Hi Mina,

               

              Please, download Zebra Setup Utilities from the link below, then follow the directions of the second link.

               

              Link to download the Zebra Setup Utilities Tool (ZSU)

              Printer Setup Utilities | Zebra

               

              Directions to run "allcv"

              Zebra Technologies - Using the SGD Allcv Command to return the Super Host Status

               

              Thanks,

              MC

                • Re: Pdf print
                  Mina Mohsen

                  Hi Manuel ,

                   

                  I already downloaded it but my printer didn't appear in the printers list ,
                  How does i make it appear.

                   

                  Thank you

                  • Re: Pdf print
                    Mina Mohsen

                    Hi Manuel ,

                    here is the report , please tell me what to do .

                     

                     

                    input.

                    input.capture : off , Choices: print,run,usb_host,off

                    print.

                    print.contrast : 0 , Choices: 0-3

                    print.tone : 0 , Choices: -100..200

                    print.tone_format : cpcl , Choices: cpcl,zpl

                    print.tone_zpl : 10.0 , Choices: 0.0-30.0

                    print.print_adj : 0 , Choices: -127-128

                    print.troubleshooting_label_choices : 

                    print.troubleshooting_label_print

                    mcr.

                    rtc.

                    rtc.time : 00:01:11

                    rtc.date : 10-07-2016

                    rtc.timezone : UTC00

                    rtc.exists : no

                    usb.

                    usb.device.

                    usb.device.vendor_id : 0x0A5F

                    usb.device.product_id : 0x00F3

                    usb.device.device_version : 1.1

                    usb.device.product_string : ZTC iMZ320-203dpi CPCL

                    usb.device.manufacturer_string : Zebra Technologies

                    usb.device.serial_string : iMZ320

                    usb.device.device_id_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;

                    usb.device.device_unique_id : off , Choices: on,off

                    usb.connected : yes

                    usb.halt : no , Choices: yes,no

                    log.

                    log.reboot.

                    log.reboot.code : 11

                    log.reboot.reason : Off key

                    log.reboot.codes : bbbbbbbb8bbbbb000bbbbbb4b444bbbb

                    log.reboot.report : Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    New OS reprogramming

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Other

                    Other

                    Other

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Low battery timeout

                    Off key

                    Low battery timeout

                    Low battery timeout

                    Low battery timeout

                    Off key

                    Off key

                    Off key

                    Off key

                     

                    netmanage.

                    netmanage.type : none , Choices: none,avalanche

                    netmanage.status_code : 0

                    netmanage.state_code : 0

                    netmanage.error_code : 0

                    netmanage.avalanche.

                    netmanage.avalanche.model_name : 

                    netmanage.avalanche.interval : 60000 , Choices: 0-4294967295

                    netmanage.avalanche.startup_update : off , Choices: on,off

                    netmanage.avalanche.interval_update : off , Choices: on,off

                    netmanage.avalanche.agent_addr : 0.0.0.0

                    netmanage.avalanche.available_agent : 0.0.0.0

                    netmanage.avalanche.available_port : 1 , Choices: 1-65535

                    netmanage.avalanche.encryption_type : 0 , Choices: 0-255

                    netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295

                    netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295

                    netmanage.avalanche.terminal_id : 0 , Choices: 0-65535

                    netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295

                    netmanage.avalanche.text_msg.

                    netmanage.avalanche.text_msg.print : off , Choices: on,off

                    netmanage.avalanche.text_msg.display : off , Choices: on,off

                    netmanage.avalanche.text_msg.beep : off , Choices: on,off

                    netmanage.avalanche.set_property

                    zbi.

                    zbi.revision : ZBI Version 2.1

                    zbi.state : off

                    zbi.last_error : 

                    zbi.program_list, Choices: fill,execute

                    zbi.start_info.

                    zbi.start_info.file_name : *:\.BAZ

                    zbi.start_info.memory_alloc : 0

                    zbi.start_info.execute

                    zbi.control.

                    zbi.control.terminate

                    zbi.control.run

                    zbi.control.break

                    zbi.control.restart

                    zbi.control.step

                    zbi.control.variable_name : 

                    zbi.control.variable_value : 

                    zbi.control.add_breakpoint

                    zbi.control.delete_breakpoint

                    zbi.control.clear_breakpoints

                    zbi.control.line_number : 0

                    zbi.reseller_key

                    zbi.key : DISABLED 

                    zbi.running_program_name : 

                    zbi.key_version : 1.1

                    zpl.

                    zpl.calibrate

                    zpl.relative_darkness : 0 , Choices: -300-300

                    zpl.save

                    zpl.label_length : 2030 , Choices: 1-32000

                    zpl.left_position : 0 , Choices: -9999-9999

                    zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff

                    zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff

                    zpl.delimiter : , (2C) , Choices: 00-FF,00-ff

                    zpl.zpl_mode : zpl II , Choices: zpl II,zpl

                    zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000

                    zpl.system_error : 0,0,00000000,00000000

                    zpl.no_errors_boot_done : yes

                    zpl.print_orientation : nor , Choices: nor,inv

                    zpl.label_top : 0 , Choices: -60-60

                    internal_wired.

                    rfid.

                    interface.

                    interface.network.

                    interface.network.settings_require_reset : no

                    interface.network.active.

                    interface.network.active.printserver : unknown

                    interface.network.active.ip_addr : 0.0.0.0

                    interface.network.active.netmask : 0.0.0.0

                    interface.network.active.gateway : 0.0.0.0

                    interface.network.active.protocol : all

                    interface.network.active.default_addr_enable : on

                    interface.network.active.wins_addr : 0.0.0.0

                    interface.network.active.arp_interval : 0

                    interface.network.active.mac_addr : 00:00:00:00:00:00

                    interface.network.active.mac_raw : 000000000000

                    interface.network.active.server_protocol : 

                    interface.network.active.server_address : 0.0.0.0

                    interface.network.active.dhcp_received_host_name : 

                    interface.network.active.cable_type : unknown

                    interface.network.active.speed : 0

                    interface.network.active.rx_packets : 

                    interface.network.active.rx_errors : 

                    interface.network.active.tx_packets : 

                    interface.network.active.tx_errors : 

                    interface.network.active.protocol_error : None

                    cutter.

                    cutter.clean_cutter

                    line_print.

                    line_print.buffer_height : 2400 , Choices: 412-2400

                    apl.

                    apl.enable : none , Choices: none

                    apl.framework_version : 1.2

                    apl.version : none

                    apl.o.

                    apl.o.graphics_byte_width : 72 , Choices: 0-255

                    formats.

                    formats.cancel_all : 

                    ezpl.

                    ezpl.print_width : 576 , Choices: 2-576

                    ezpl.media_type : mark , Choices: continuous,mark

                    ezpl.print_method : direct thermal , Choices: direct thermal

                    ezpl.tear_off : 0 , Choices: -120-120

                    ezpl.print_mode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator

                    ezpl.reprint_mode : off , Choices: on,off

                    ezpl.head_close_action : feed , Choices: feed,length,no motion

                    ezpl.power_up_action : no motion , Choices: feed,length,no motion

                    ezpl.label_length_max : 39 , Choices: 1.0-39.0

                    ezpl.manual_calibration : complete , Choices: inProgress,complete

                    ezpl.label_sensor : 70 , Choices: 0-255

                    ezpl.take_label :  , Choices: 0-255

                    ezpl.restore_defaults, Choices: reload printer,reload network

                    alerts.

                    alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N

                    alerts.add

                    alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD, RIBBON AUTH ERROR, ODOMETER TRIGGERED

                    alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK

                    alerts.tracked_settings.

                    alerts.tracked_settings.zbi_notified : 

                    alerts.tracked_settings.log_tracked : 

                    alerts.tracked_settings.log : 

                    alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000

                    alerts.tracked_settings.clear_log

                    alerts.http.

                    alerts.http.proxy : 

                    alerts.http.logging.

                    alerts.http.logging.entries

                    alerts.http.logging.max_entries : 0 , Choices: 0-10000

                    alerts.http.logging.clear

                    alerts.http.authentication.

                    alerts.http.authentication.add

                    alerts.http.authentication.remove

                    alerts.http.authentication.entries : 

                    weblink.

                    weblink.enable : off

                    weblink.printer_reset_required : no

                    weblink.restore_defaults

                    weblink.logging.

                    weblink.logging.entries

                    weblink.logging.max_entries : 0 , Choices: 0-10000

                    weblink.logging.clear

                    weblink.ip.

                    weblink.ip.conn1.

                    weblink.ip.conn1.location : 

                    weblink.ip.conn1.retry_interval : 10 , Choices: 1-600

                    weblink.ip.conn1.proxy : 

                    weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100

                    weblink.ip.conn1.authentication.

                    weblink.ip.conn1.authentication.add

                    weblink.ip.conn1.authentication.remove

                    weblink.ip.conn1.authentication.entries : 

                    weblink.ip.conn1.test.

                    weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest

                    weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both

                    weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800

                    weblink.ip.conn1.num_connections : 0

                    weblink.ip.conn2.

                    weblink.ip.conn2.location : 

                    weblink.ip.conn2.retry_interval : 10 , Choices: 1-600

                    weblink.ip.conn2.proxy : 

                    weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100

                    weblink.ip.conn2.authentication.

                    weblink.ip.conn2.authentication.add

                    weblink.ip.conn2.authentication.remove

                    weblink.ip.conn2.authentication.entries : 

                    weblink.ip.conn2.test.

                    weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest

                    weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both

                    weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800

                    weblink.ip.conn2.num_connections : 0

                    weblink.cloud_connect.

                    weblink.cloud_connect.enable : on , Choices: on,off

                    weblink.cloud_connect.connect

                    weblink.cloud_connect.status : NOT ACTIVE

                    weblink.cloud_connect.connection_key : 0000000000

                    weblink.cloud_connect.configuration_key : 0000000000

                    weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete

                    weblink.zebra_connector.

                    weblink.zebra_connector.version : 0.04

                    weblink.zebra_connector.enable : on , Choices: on,off

                    weblink.zebra_connector.proxy : 

                    weblink.zebra_connector.authentication.

                    weblink.zebra_connector.authentication.add

                    weblink.zebra_connector.authentication.remove

                    weblink.zebra_connector.authentication.entries : 

                    capture.

                    capture.channel1.

                    capture.channel1.port : off , Choices: usb,bt,off

                    capture.channel1.delimiter :

                     

                    capture.channel1.max_length : 1000 , Choices: 1-3000

                    capture.channel1.count : 0 , Choices: 0-4294967295

                    capture.channel1.data.

                    capture.channel1.data.raw : 

                    capture.channel1.data.mime : 

                    nfc.

                    cradle.

                    ribbon.

                    ""bluetooth.

                    bluetooth.discoverable : on , Choices: on,off

                    bluetooth.friendly_name : XXXXJ141701348

                    bluetooth.version : 4.3.1p1

                    bluetooth.date : 02/13/2015

                    bluetooth.local_name : XXXXJ141701348

                    bluetooth.address : AC:3F:A4:19:47:4F

                    bluetooth.bluetooth_pin : *

                    bluetooth.short_address : AC3FA419474F

                    bluetooth.radio_version : 2.1

                    bluetooth.enable : on , Choices: on,off

                    bluetooth.connected : no

                    bluetooth.minimum_security_mode : 1 , Choices: 1,2,3,4

                    bluetooth.connected_security_mode : nc

                    bluetooth.bonding : on , Choices: on,off

                    bluetooth.clear_bonding_cache

                    bluetooth.enable_reconnect : iOS_only , Choices: off,iOS_only

                    bluetooth.allow_non_display_numeric_comparison : print , Choices: off,print,no print

                    bluetooth.json_config_channel_enable : on , Choices: on,off

                    bluetooth.page_scan_window : 60 , Choices: 15,60

                    card.

                    card.inserted : Not Inserted

                    card.cisproc : Processed

                    card.mfgid : 

                    card.cardid : 

                    card.fncode : 000c

                    card.idtext1 : 

                    card.idtext2 : 

                    card.idtext3 : 

                    card.idtext4 : 

                    card.fcrbase : Not Detected

                    card.fcrlist : NONE DETECTED

                    card.defcfg : Not Detected

                    card.cor : Not Present

                    card.mac_addr : 00:00:00:00:00:00

                    card.mac_raw : 000000000000

                    card.enable : on , Choices: on,off

                    comm.

                    head.

                    head.latch : ok

                    head.resolution.

                    head.resolution.in_dpi : 203

                    ip.

                    ip.dhcp.

                    ip.dhcp.enable : on , Choices: on,off

                    ip.dhcp.cid_type : 1 , Choices: 0,1,2

                    ip.dhcp.cid_prefix : 

                    ip.dhcp.cid_value : 000000000000

                    ip.dhcp.requests_per_session : 2 , Choices: 1-10

                    ip.dhcp.request_timeout : 2 , Choices: 2-30

                    ip.dhcp.session_interval : 10 , Choices: 0-60

                    ip.dhcp.lease.

                    ip.dhcp.lease.length : 0

                    ip.dhcp.lease.time_left : 0

                    ip.dhcp.lease.server : 0.0.0.0

                    ip.dhcp.lease.last_attempt : 0

                    ip.dhcp.cache_ip : off , Choices: on,off

                    ip.dhcp.vendor_class_id : Zebra Technologies ZTC iMZ320-203dpi CPCL

                    ip.dhcp.user_class_id : 

                    ip.dhcp.option12 : on , Choices: on,off

                    ip.dhcp.option12_format : 

                    ip.dhcp.option12_value : XXXXJ141701348

                    ip.dhcp.cid_enable : off , Choices: on,off

                    ip.dhcp.cid_suffix : 000000000000

                    ip.dhcp.cid_all : 000000000000

                    ip.dhcp.arp_verify : off , Choices: on,off

                    ip.dhcp.auto_provision_enable : on , Choices: on,off

                    ip.dhcp.ntp.

                    ip.dhcp.ntp.enable : off , Choices: on,off

                    ip.dhcp.ntp.received_servers : 

                    ip.ftp.

                    ip.ftp.enable : on , Choices: on,off

                    ip.ftp.execute_file : off , Choices: on,off

                    ip.ftp.request_password : no , Choices: yes,no

                    ip.lpd.

                    ip.lpd.enable : on , Choices: on,off

                    ip.tcp.

                    ip.tcp.enable : on , Choices: on,off

                    ip.tcp.nagle_algorithm : enabled , Choices: enabled,disabled

                    ip.udp.

                    ip.udp.enable : on , Choices: on,off

                    ip.http.

                    ip.http.enable : on , Choices: on,off

                    ip.http.admin_name : admin

                    ip.http.admin_password : *

                    ip.http.port : 80

                    ip.http.faq_url : http://support.zebra.com

                    ip.http.custom_link_name : 

                    ip.http.custom_link_url : 

                    ip.smtp.

                    ip.smtp.enable : on , Choices: on,off

                    ip.smtp.server_addr : 0.0.0.0

                    ip.smtp.domain : ZBRPrintServer.com

                    ip.pop3.

                    ip.pop3.enable : on , Choices: on,off

                    ip.pop3.print_headers : off , Choices: on,off

                    ip.pop3.verbose_headers : off , Choices: on,off

                    ip.pop3.print_body : off , Choices: on,off

                    ip.pop3.save_attachments : off , Choices: on,off

                    ip.pop3.poll : 240 , Choices: 0-65535

                    ip.pop3.username : 

                    ip.pop3.password : *

                    ip.pop3.server_addr : 0.0.0.0

                    ip.pop3.print_attachments : off , Choices: on,off

                    ip.snmp.

                    ip.snmp.enable : on , Choices: on,off

                    ip.snmp.get_community_name : *

                    ip.snmp.set_community_name : *

                    ip.snmp.create_mib

                    ip.snmp.trap_community_name : public

                    ip.telnet.

                    ip.telnet.enable : on , Choices: on,off

                    ip.telnet.disconnect

                    ip.addr : 0.0.0.0

                    ip.netmask : 255.255.255.0

                    ip.gateway : 0.0.0.0

                    ip.port : 6101

                    ip.remote : 

                    ip.ping_remote

                    ip.netstat :

                     

                    ip.remote_port : 10013

                    ip.remote_autoconnect : off , Choices: on,off

                    ip.bootp.

                    ip.bootp.enable : on , Choices: on,off

                    ip.mirror.

                    ip.mirror.auto : off , Choices: on,off

                    ip.mirror.username : user

                    ip.mirror.password : *

                    ip.mirror.server : 127.0.0.1

                    ip.mirror.path : Zebra

                    ip.mirror.freq : 0 , Choices: 0-65535

                    ip.mirror.fetch

                    ip.mirror.version : Oct  7 2016 21:40:23

                    ip.mirror.freq_hours : 0 , Choices: 0-100

                    ip.mirror.error_retry : 0 , Choices: 0-65535

                    ip.mirror.feedback.

                    ip.mirror.feedback.auto : off , Choices: on,off

                    ip.mirror.feedback.path : Zebra/feedback

                    ip.mirror.feedback.freq : 0 , Choices: 0-65535

                    ip.mirror.feedback.odometer : 0 , Choices: 0-4294967295

                    ip.mirror.success : no

                    ip.mirror.success_time : Oct 07 2016 00:00:13

                    ip.mirror.last_time : Oct 07 2016 00:00:13

                    ip.mirror.last_error : No Error

                    ip.mirror.mode : ftp , Choices: ftp,sftp

                    ip.mirror.reset_delay : 5 , Choices: 0-900

                    ip.mirror.interface : both , Choices: both,wired,wireless

                    ip.mirror.appl_path : 

                    ip.ping_len : 56 , Choices: 56-65535

                    ip.dns.

                    ip.dns.domain : 

                    ip.dns.servers : 

                    ip.discovery.

                    ip.discovery.enable : on , Choices: on,off

                    ip.discovery.port : 4201

                    ip.roam_packet : on , Choices: on,off

                    ip.arp_interval : 0 , Choices: 0-30

                    ip.primary_network : 2 , Choices: 2

                    ip.active_network : unknown

                    ip.ntp.

                    ip.ntp.enable : off , Choices: on,off

                    ip.ntp.servers : 

                    ip.ntp.log

                    ip.port_alternate : 9100

                    ip.port_json_config : 9200

                    ip.port_single_conn : 9300

                    ip.port_single_conn_idle_timeout : 180 , Choices: 0-3600

                    label.

                    label.x_move : 0 , Choices: -575-575

                    label.y_move : 0 , Choices: -32768-32767

                    media.

                    media.status : ok

                    media.sense_mode : bar , Choices: bar

                    media.tof : 0 , Choices: -84.0-64.0

                    media.type : label , Choices: label,journal

                    media.bar_location : front , Choices: front

                    media.width_sense.

                    media.width_sense.enable : off , Choices: off

                    media.width_sense.in_mm : 72.1

                    media.width_sense.in_cm : 7.21

                    media.width_sense.in_dots : 576

                    media.width_sense.in_inches : 2.837

                    media.printmode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator

                    media.speed : 3.2 , Choices: 1.0-5.0

                    media.feed_length : 1200 , Choices: 0-20000

                    media.feed_skip : 35 , Choices: 0-50

                    media.draft_mode : off , Choices: on,off

                    media.part_number : 

                    media.serial_number : 

                    sensor.

                    sensor.paper_supply : ok

                    sensor.peeler : clear

                    sensor.recall_factory_cal

                    sensor.peeler_present : Not Present

                    wlan.

                    wlan.operating_mode : infrastructure , Choices: ad hoc,infrastructure

                    wlan.essid : 125

                    wlan.current_essid : 

                    wlan.station_name : ZEBRA

                    wlan.current_tx_rate : 1.0

                    wlan.encryption_mode : off , Choices: off,40-bit,128-bit

                    wlan.associated : no

                    wlan.encryption_index : 1 , Choices: 1,2,3,4

                    wlan.encryption_key1 : *

                    wlan.encryption_key2 : *

                    wlan.encryption_key3 : *

                    wlan.encryption_key4 : *

                    wlan.leap_mode : off , Choices: on,off

                    wlan.leap_username : 

                    wlan.leap_password : *

                    wlan.power_save : on , Choices: on,off

                    wlan.auth_type : open , Choices: open,shared

                    wlan.preamble : long , Choices: long,short

                    wlan.bssid : 00:00:00:00:00:00

                    wlan.firmware_version : 00.00.00

                    wlan.signal_strength : 0

                    wlan.poor_signal_threshold : 0 , Choices: 0-100

                    wlan.international_mode : off , Choices: on,off

                    wlan.roam.

                    wlan.roam.signal : 40 , Choices: 1-75

                    wlan.roam.interval : 5 , Choices: 5-255

                    wlan.roam.interchannel_delay : 400 , Choices: 10-30000

                    wlan.roam.max_chan_scan_time : 100 , Choices: 10-500

                    wlan.roam.rssi : 80 , Choices: 60-125

                    wlan.roam.max_fail : 10 , Choices: 2-75

                    wlan.roam.monitor : off , Choices: off,print,file

                    wlan.channel_mask : 0x3FFF , Choices: 14 bits

                    wlan.channel : 

                    wlan.wpa.

                    wlan.wpa.enable : off , Choices: off,on

                    wlan.wpa.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast

                    wlan.wpa.psk : *

                    wlan.wpa.wpa_version : none

                    wlan.wpa.groupkey_ciphersuite : NONE

                    wlan.wpa.pairwise_ciphersuite : NONE

                    wlan.wpa.timecheck : yes , Choices: yes,no

                    wlan.8021x.

                    wlan.8021x.enable : off , Choices: off,on,wpa

                    wlan.8021x.authentication : psk , Choices: psk,leap,peap,eap-tls,ttls,fast

                    wlan.8021x.ttls_tunnel : pap , Choices: pap,chap,mschap,mschapv2

                    wlan.8021x.peap.

                    wlan.8021x.peap.peap_username : 

                    wlan.8021x.peap.peap_password : *

                    wlan.8021x.peap.privkey_password : *

                    wlan.8021x.peap.validate_server_certificate : on , Choices: on,off

                    wlan.8021x.eap.

                    wlan.8021x.eap.username : 

                    wlan.8021x.eap.password : *

                    wlan.8021x.eap.privkey_password : *

                    wlan.adhocchannel : 1 , Choices: 1,2,3,4,5,6,7,8,9,10,11,12,13,14

                    wlan.adhocautomode : off , Choices: on,off

                    wlan.enable : on , Choices: on,off

                    wlan.encryption_optional : no , Choices: yes,no

                    wlan.adhoc_last_channel

                    wlan.secure_ssid : off , Choices: on,off

                    wlan.ip.

                    wlan.ip.addr : 0.0.0.0

                    wlan.ip.netmask : 255.255.255.0

                    wlan.ip.gateway : 0.0.0.0

                    wlan.ip.port : 6101

                    wlan.ip.arp_interval : 0 , Choices: 0-30

                    wlan.ip.dhcp.

                    wlan.ip.dhcp.requests_per_session : 2 , Choices: 1-10

                    wlan.ip.dhcp.request_timeout : 2 , Choices: 2-30

                    wlan.ip.dhcp.session_interval : 10 , Choices: 0-60

                    wlan.ip.dhcp.lease.

                    wlan.ip.dhcp.lease.length : 0

                    wlan.ip.dhcp.lease.time_left : 0

                    wlan.ip.dhcp.lease.server : 0.0.0.0

                    wlan.ip.dhcp.lease.last_attempt : 0

                    wlan.ip.dhcp.cache_ip : off , Choices: on,off

                    wlan.ip.dhcp.cid_type : 1 , Choices: 0,1,2

                    wlan.ip.dhcp.cid_prefix : 

                    wlan.ip.dhcp.cid_enable : off , Choices: on,off

                    wlan.ip.dhcp.cid_suffix : 000000000000

                    wlan.ip.dhcp.cid_all : 000000000000

                    wlan.ip.dhcp.option12 : on , Choices: on,off

                    wlan.ip.dhcp.option12_format : 

                    wlan.ip.dhcp.option12_value : XXXXJ141701348

                    wlan.ip.dhcp.arp_verify : off , Choices: on,off

                    wlan.ip.protocol : all , Choices: all,bootp,dhcp,dhcp and bootp,gleaning only,rarp,permanent

                    wlan.ip.default_addr_enable : on , Choices: off,on,saved_ip

                    wlan.ip.timeout.

                    wlan.ip.timeout.enable : on , Choices: on,off

                    wlan.ip.timeout.value : 300 , Choices: 1-3600

                    wlan.ip.dns.

                    wlan.ip.dns.domain : 

                    wlan.ip.dns.servers : 

                    wlan.ip.wins.

                    wlan.ip.wins.addr : 0.0.0.0

                    wlan.ip.wins.permanent_source : off , Choices: on,off

                    wlan.ip.port_alternate : 9100

                    wlan.ip.port_json_config : 9200

                    wlan.keep_alive.

                    wlan.keep_alive.enable : on , Choices: on,off

                    wlan.keep_alive.timeout : 15 , Choices: 5-300

                    wlan.wep.

                    wlan.wep.index : 1 , Choices: 1,2,3,4

                    wlan.wep.auth_type : open , Choices: open,shared

                    wlan.wep.key_format : hex , Choices: hex,ascii

                    wlan.wep.key1 : *

                    wlan.wep.key2 : *

                    wlan.wep.key3 : *

                    wlan.wep.key4 : *

                    wlan.security : none , Choices: none,wep 40-bit,wep 128-bit,eap-tls,eap-ttls,eap-fast,peap,leap,wpa psk,wpa eap-tls,wpa eap-ttls,wpa eap-fast,wpa peap,wpa leap

                    wlan.private_key_password : *

                    wlan.username : 

                    wlan.password : *

                    wlan.mac_addr : 00:00:00:00:00:00

                    wlan.mac_raw : 000000000000

                    wlan.11n.

                    wlan.11n.greenfield : unsupported

                    wlan.11n.short_gi_40mhz : unsupported

                    wlan.11n.short_gi_20mhz : unsupported

                    wlan.11n.rifs : unsupported

                    wlan.11n.20mhz_only : unsupported

                    wlan.11n.amsdu : unsupported

                    wlan.region_code : all

                    wlan.country_code : all , Choices: all

                    wlan.user_channel_list : 1,2,3,4,5,6,7,8,9,10,11 , Choices: 1,2,3,4,5,6,7,8,9,10,11,all

                    wlan.allowed_band : 2.4 , Choices: 2.4

                    wlan.waveagent.

                    wlan.waveagent.enable : unsupported

                    wlan.waveagent.udp_port : unsupported

                    wlan.permitted_channels : 1,2,3,4,5,6,7,8,9,10,11

                    wlan.active_channels : 1,2,3,4,5,6,7,8,9,10,11

                    wlan.11d.

                    wlan.11d.enable : off , Choices: on,off

                    wlan.11d.current_country : not available

                    wlan.11d.discovered_channels : not available

                    wlan.authenticated : no

                    wlan.available : no

                    wlan.authentication_error : none

                    wlan.regulatory_data_version : 1.19

                    wlan.rts_cts_enabled

                    wlan.11ac.

                    wlan.11ac.short_gi_80mhz : unsupported

                    wlan.11ac.ldpc : unsupported

                    wlan.11ac.stbc : unsupported

                    wlan.11ac.80mhz_enable : unsupported

                    wlan.pmf : enabled , Choices: disabled,enabled,required

                    display.

                    memory.

                    memory.flash_size : 16777216 Bytes

                    memory.ram_size : 4194304 Bytes

                    memory.flash_free : 16607744 Bytes Free

                    memory.ram_free : 4171776 Bytes Free

                    power.

                    power.voltage : 7.91

                    power.percent_full : 100% Full

                    power.status : ok

                    power.low_battery_warning : 6.93(176)

                    power.low_battery_shutdown : 6.53(166)

                    power.low_battery_timeout : 60 Seconds , Choices: 0-8191

                    power.inactivity_timeout : 0 Seconds , Choices: 0-65535

                    power.dtr_power_off : off , Choices: on,off

                    power.shutdown

                    power.ascii_graph : ÞÍÍÍÍÍÃ

                    power.power_on_cycles : 144

                    power.label_queue.

                    power.label_queue.shutdown : no , Choices: yes,no

                    file.

                    file.dir :

                    - DIR *:*.*

                    * E:TT0003M_.TTF    169188         

                    * Z:0.TTF    125904  P    0 

                    * Z:A.FNT      6839  P    A 

                    * Z:AZTEC.BAR         0  P      

                    * Z:B.FNT      7746  P    B 

                    * Z:BTSYMBOL.PCX       884  P      

                    * Z:CODABAR.BAR         0  P      

                    * Z:CODABLK.BAR         0  P      

                    * Z:CODE11.BAR         0  P      

                    * Z:CODE128.BAR         0  P      

                    * Z:CODE39.BAR         0  P      

                    * Z:CODE49.BAR         0  P      

                    * Z:CODE93.BAR         0  P      

                    * Z:D.FNT     10648  P    CD

                    * Z:E12.FNT     15691  P      

                    * Z:E24.FNT     47056  P      

                    * Z:E6.FNT      8520  P      

                    * Z:E8.FNT     10893  P    E 

                    * Z:EAN-13.BAR         0  P      

                    * Z:EAN-8.BAR         0  P      

                    * Z:ELEMENTOUT.ZPL      3830  P      

                    * Z:F.FNT     13275  P    F 

                    * Z:FIRSTDOTLOCATION.ZPL     10420  P      

                    * Z:G.FNT     49663  P    G 

                    * Z:GS.FNT      5470  P    ? 

                    * Z:H12.FNT     11536  P      

                    * Z:H24.FNT     30436  P      

                    * Z:H6.FNT      7247  P      

                    * Z:H8.FNT      7825  P    H 

                    * Z:I2OF5.BAR         0  P      

                    * Z:IDMATRIX.BAR         0  P      

                    * Z:IMAGECOMPRESSION.ZPL      9524  P      

                    * Z:IND2OF5.BAR         0  P      

                    * Z:INDEX.SHTML      6635  P      

                    * Z:LANGUAGE.BMP       400  P      

                    * Z:LOGMARS.BAR         0  P      

                    * Z:LOGO.PNG     20154  P      

                    * Z:MAXICODE.BAR         0  P      

                    * Z:MIB200.TXT     46572  P      

                    * Z:MICROPDF.BAR         0  P      

                    * Z:MSICODE.BAR         0  P      

                    * Z:NETWORK.BMP       400  P      

                    * Z:ONEDOT.BMP        58  P      

                    * Z:P.FNT       116  P    P 

                    * Z:PASSWORD.WML      1304  P      

                    * Z:PDF417.BAR         0  P      

                    * Z:PLANETCD.BAR         0  P      

                    * Z:PLESSEY.BAR         0  P      

                    * Z:PORTS.BMP       400  P      

                    * Z:POSTNET.BAR         0  P      

                    * Z:PRINTBTMAC.CMD       287  P      

                    * Z:Q.FNT       116  P    Q 

                    * Z:QRCODE.BAR         0  P      

                    * Z:R.FNT       116  P    R 

                    * Z:REGDB.NRD    297896  P      

                    * Z:REPRINT.NRD         3  P      

                    * Z:RFIDRCPE.XML     32780  P      

                    * Z:RSS.BAR         0  P      

                    * Z:S.FNT       116  P    S 

                    * Z:S2OF5.BAR         0  P      

                    * Z:SENSORS.BMP       400  P      

                    * Z:SETTINGS.BMP       400  P      

                    * Z:SIGNAL_STRENGTH_0_BAR_ICON.BMP       128  P      

                    * Z:SIGNAL_STRENGTH_1_BAR_ICON.BMP       128  P      

                    * Z:SIGNAL_STRENGTH_2_BAR_ICON.BMP       128  P      

                    * Z:SIGNAL_STRENGTH_3_BAR_ICON.BMP       128  P      

                    * Z:SIGNAL_STRENGTH_4_BAR_ICON.BMP       128  P      

                    * Z:T.FNT       116  P    T 

                    * Z:TLC39.BAR         0  P      

                    * Z:TOOLS.BMP       400  P      

                    * Z:TWO_KEY_MESSAGE.BMP      8704  P      

                    * Z:U.FNT       116  P    U 

                    * Z:UIF.SS     11596  P      

                    * Z:UPC-A.BAR         0  P      

                    * Z:UPC-E.BAR         0  P      

                    * Z:UPC-EAN.BAR         0  P      

                    * Z:UTT.SS     11588  P      

                    * Z:V.FNT       116  P    V 

                     

                     

                    -   4171776 bytes free R: RAM

                    -  16607744 bytes free E: ONBOARD FLASH

                     

                    file.type : "?"

                    file.delete

                    file.print

                    file.run

                    file.rename

                    file.dir_format : zpl , Choices: cpcl,zpl

                    file.drive_info

                    file.drive_listing

                    file.capture_response.

                    file.capture_response.begin

                    file.capture_response.end

                    file.capture_response.destination : printer_file , Choices: printer_file,usb_file

                    odometer.

                    odometer.user_label_count : 38 , Choices: 0-4294967295

                    odometer.user_label_count1 : 38

                    odometer.user_label_count2 : 38

                    odometer.total_label_count : 38

                    odometer.total_print_length : 1294 INCHES, 3289 CENTIMETERS

                    odometer.latch_open_count : 33

                    odometer.label_dot_length : 34

                    odometer.media_marker_count : 12

                    odometer.media_marker_count1 : 1294 INCHES, 3289 CENTIMETERS

                    odometer.media_marker_count2 : 1294 INCHES, 3289 CENTIMETERS

                    odometer.headclean : 1294 INCHES, 3289 CENTIMETERS

                    odometer.headnew : 1294 INCHES, 3289 CENTIMETERS

                    odometer.rfid.

                    appl.

                    appl.date : 10/7/2016

                    appl.name : V73.20.01Z

                    appl.version : 7320

                    appl.bootblock : 5.5.13

                    appl.link_os_version : 4.0

                    device.

                    device.reset

                    device.restore_defaults, Choices: wlan,ip,power,bluetooth,all,device.alerts

                    device.prompted_network_reset, Choices: yes,no

                    device.friendly_name : XXXXJ141701348

                    device.company_name : Zebra Technologies

                    device.product_name : iMZ320

                    device.product_name_submodel : none

                    device.company_contact : 

                    device.location : 

                    device.position.

                    device.position.latitude : 0.000000 , Choices: -90.0-90.0

                    device.position.longitude : 0.000000 , Choices: -180.0-180.0

                    device.position.altitude : 0.000000 , Choices: -10000.0-406700000.0

                    device.position.accuracy : 0.000000 , Choices: 0.0-406700000.0

                    device.status : ready

                    device.jobs_print : 1

                    device.languages : line_print , Choices: zpl,line_print,hybrid_xml_zpl

                    device.cph_enable : off , Choices: on,off

                    device.cph_interval : 0 , Choices: 0-65535

                    device.macro_get : 

                    device.user_p1 : 

                    device.user_p2 : 

                    device.uptime : 00 days 00 hours 02 mins 34 secs

                    device.volume : 

                    device.local_menu_mode : off , Choices: off,on

                    device.printhead.

                    device.printhead.serialnum : No Serial Number Available

                    device.printhead.coldwarning : 

                    device.printhead.resolution : 8.0

                    device.frontpanel.

                    device.unique_id : XXXXJ141701348

                    device.xml.

                    device.xml.enable : on , Choices: on,off

                    device.ff_disable : off , Choices: on,off

                    device.pnp_option : cpcl , Choices: cpcl,zpl,epl

                    device.pnp_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;

                    device.download_connection_timeout : 0 , Choices: 0-65535

                    device.save_2key : off , Choices: on,off,now

                    device.print_2key : 

                    device.print_reprogram_2key : on , Choices: on,off

                    device.epl_legacy_mode : off

                    device.cpcl_synchronous_mode : off , Choices: on,off

                    device.command_override.

                    device.command_override.add

                    device.command_override.clear

                    device.command_override.list : 

                    device.command_override.active : yes , Choices: yes,no

                    device.host_identification : iMZ320-200dpi,V73.20.01Z,8,4096KB

                    device.host_status : 000,0,0,2030,000,0,0,0,000,0,0,0

                    000,0,0,0,0,0,4,0,00000000,1,000

                    1234,0

                    device.super_host_status

                    device.pause

                    device.unpause

                    device.serial_numbers.

                    device.serial_numbers.mlb : 

                    device.serial_numbers.mlb_date : 

                    device.serial_numbers.option_board : 

                    device.serial_numbers.option_board_date : 

                    device.serial_numbers.control_panel : 

                    device.serial_numbers.control_panel_date : 

                    device.serial_numbers.cutter : 

                    device.serial_numbers.cutter_date : 

                    device.ltu_installed : no

                    device.cutter_installed : no

                    device.rewinder_installed : no

                    device.bluetooth_installed : yes

                    device.print_out_report, Choices: settings,network,formats,images,fonts,barcodes,all,sensor profile

                    device.diagnostic_print : disabled , Choices: disabled,enabled

                    device.job_log.

                    device.job_log.total_jobs : 3

                    device.print_geometry_revision : 0

                    device.user_vars.

                    device.user_vars.create

                    device.user_vars.set_range

                    device.docked : no , Choices: yes,no

                    device.syslog.

                    device.syslog.enable : off , Choices: off,on

                    device.syslog.configuration : 

                    device.syslog.save_local_file : no , Choices: no,yes

                    device.syslog.log_max_file_size : 10000 , Choices: 10000-400000

                    device.syslog.entries

                    device.syslog.clear_log

                    device.feature.

                    device.feature.mfi : present

                    device.feature.mcr : not available

                    device.feature.bluetooth_le : not present

                    device.feature.nfc : not available

                    device.feature.ribbon_cartridge : not available

                    device.feature.lock : not available

                    device.feature.802_11ac : not available

                    device.feature.applicator : not available

                    device.feature.lighted_arrows : not available

                    device.configuration_number : M3I-0UB0E020-00

                    device.alerts.

                    device.alerts.audible : 

                    device.pmcu.

                    device.pmcu.revision : 

                    device.pmcu.desired_revision : 

                    device.mcu_communication.

                    device.mcu_communication.revision : 

                    device.mcu_communication.desired_revision : 

                    device.mcu_cutter.

                    device.mcu_cutter.revision : 

                    device.mcu_cutter.desired_revision : 

                    device.set_clock_to_build_date : enabled , Choices: enabled,disabled

                    input.

                    input.capture : off , Choices: print,run,usb_host,off

                    print.

                    print.contrast : 0 , Choices: 0-3

                    print.tone : 0 , Choices: -100..200

                    print.tone_format : cpcl , Choices: cpcl,zpl

                    print.tone_zpl : 10.0 , Choices: 0.0-30.0

                    print.print_adj : 0 , Choices: -127-128

                    print.troubleshooting_label_choices : 

                    print.troubleshooting_label_print

                    mcr.

                    rtc.

                    rtc.time : 00:02:34

                    rtc.date : 10-07-2016

                    rtc.timezone : UTC00

                    rtc.exists : no

                    usb.

                    usb.device.

                    usb.device.vendor_id : 0x0A5F

                    usb.device.product_id : 0x00F3

                    usb.device.device_version : 1.1

                    usb.device.product_string : ZTC iMZ320-203dpi CPCL

                    usb.device.manufacturer_string : Zebra Technologies

                    usb.device.serial_string : iMZ320

                    usb.device.device_id_string : MANUFACTURER:Zebra Technologies ;COMMAND SET:CPCL;MODEL:ZTC iMZ320;CLASS:PRINTER;OPTIONS:XML;

                    usb.device.device_unique_id : off , Choices: on,off

                    usb.connected : yes

                    usb.halt : no , Choices: yes,no

                    log.

                    log.reboot.

                    log.reboot.code : 11

                    log.reboot.reason : Off key

                    log.reboot.codes : bbbbbbbb8bbbbb000bbbbbb4b444bbbb

                    log.reboot.report : Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    New OS reprogramming

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Other

                    Other

                    Other

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Off key

                    Low battery timeout

                    Off key

                    Low battery timeout

                    Low battery timeout

                    Low battery timeout

                    Off key

                    Off key

                    Off key

                    Off key

                     

                    netmanage.

                    netmanage.type : none , Choices: none,avalanche

                    netmanage.status_code : 0

                    netmanage.state_code : 0

                    netmanage.error_code : 0

                    netmanage.avalanche.

                    netmanage.avalanche.model_name : 

                    netmanage.avalanche.interval : 60000 , Choices: 0-4294967295

                    netmanage.avalanche.startup_update : off , Choices: on,off

                    netmanage.avalanche.interval_update : off , Choices: on,off

                    netmanage.avalanche.agent_addr : 0.0.0.0

                    netmanage.avalanche.available_agent : 0.0.0.0

                    netmanage.avalanche.available_port : 1 , Choices: 1-65535

                    netmanage.avalanche.encryption_type : 0 , Choices: 0-255

                    netmanage.avalanche.udp_timeout : 3000 , Choices: 0-4294967295

                    netmanage.avalanche.tcp_connection_timeout : 3000 , Choices: 0-4294967295

                    netmanage.avalanche.terminal_id : 0 , Choices: 0-65535

                    netmanage.avalanche.realtime_update_int : 300 , Choices: 0-4294967295

                    netmanage.avalanche.text_msg.

                    netmanage.avalanche.text_msg.print : off , Choices: on,off

                    netmanage.avalanche.text_msg.display : off , Choices: on,off

                    netmanage.avalanche.text_msg.beep : off , Choices: on,off

                    netmanage.avalanche.set_property

                    zbi.

                    zbi.revision : ZBI Version 2.1

                    zbi.state : off

                    zbi.last_error : 

                    zbi.program_list, Choices: fill,execute

                    zbi.start_info.

                    zbi.start_info.file_name : *:\.BAZ

                    zbi.start_info.memory_alloc : 0

                    zbi.start_info.execute

                    zbi.control.

                    zbi.control.terminate

                    zbi.control.run

                    zbi.control.break

                    zbi.control.restart

                    zbi.control.step

                    zbi.control.variable_name : 

                    zbi.control.variable_value : 

                    zbi.control.add_breakpoint

                    zbi.control.delete_breakpoint

                    zbi.control.clear_breakpoints

                    zbi.control.line_number : 0

                    zbi.reseller_key

                    zbi.key : DISABLED 

                    zbi.running_program_name : 

                    zbi.key_version : 1.1

                    zpl.

                    zpl.calibrate

                    zpl.relative_darkness : 0 , Choices: -300-300

                    zpl.save

                    zpl.label_length : 2030 , Choices: 1-32000

                    zpl.left_position : 0 , Choices: -9999-9999

                    zpl.format_prefix : ^ (5E) , Choices: 00-FF,00-ff

                    zpl.command_prefix : ~ (7E) , Choices: 00-FF,00-ff

                    zpl.delimiter : , (2C) , Choices: 00-FF,00-ff

                    zpl.zpl_mode : zpl II , Choices: zpl II,zpl

                    zpl.system_status : 0,0,00000000,00000000,0,00000000,00000000

                    zpl.system_error : 0,0,00000000,00000000

                    zpl.no_errors_boot_done : yes

                    zpl.print_orientation : nor , Choices: nor,inv

                    zpl.label_top : 0 , Choices: -60-60

                    internal_wired.

                    rfid.

                    interface.

                    interface.network.

                    interface.network.settings_require_reset : no

                    interface.network.active.

                    interface.network.active.printserver : unknown

                    interface.network.active.ip_addr : 0.0.0.0

                    interface.network.active.netmask : 0.0.0.0

                    interface.network.active.gateway : 0.0.0.0

                    interface.network.active.protocol : all

                    interface.network.active.default_addr_enable : on

                    interface.network.active.wins_addr : 0.0.0.0

                    interface.network.active.arp_interval : 0

                    interface.network.active.mac_addr : 00:00:00:00:00:00

                    interface.network.active.mac_raw : 000000000000

                    interface.network.active.server_protocol : 

                    interface.network.active.server_address : 0.0.0.0

                    interface.network.active.dhcp_received_host_name : 

                    interface.network.active.cable_type : unknown

                    interface.network.active.speed : 0

                    interface.network.active.rx_packets : 

                    interface.network.active.rx_errors : 

                    interface.network.active.tx_packets : 

                    interface.network.active.tx_errors : 

                    interface.network.active.protocol_error : None

                    cutter.

                    cutter.clean_cutter

                    line_print.

                    line_print.buffer_height : 2400 , Choices: 412-2400

                    apl.

                    apl.enable : none , Choices: none

                    apl.framework_version : 1.2

                    apl.version : none

                    apl.o.

                    apl.o.graphics_byte_width : 72 , Choices: 0-255

                    formats.

                    formats.cancel_all : 

                    ezpl.

                    ezpl.print_width : 576 , Choices: 2-576

                    ezpl.media_type : mark , Choices: continuous,mark

                    ezpl.print_method : direct thermal , Choices: direct thermal

                    ezpl.tear_off : 0 , Choices: -120-120

                    ezpl.print_mode : rewind , Choices: tear off,peel off,rewind,cutter,delayed cut,linerless peel,linerless rewind,linerless tear,applicator

                    ezpl.reprint_mode : off , Choices: on,off

                    ezpl.head_close_action : feed , Choices: feed,length,no motion

                    ezpl.power_up_action : no motion , Choices: feed,length,no motion

                    ezpl.label_length_max : 39 , Choices: 1.0-39.0

                    ezpl.manual_calibration : complete , Choices: inProgress,complete

                    ezpl.label_sensor : 70 , Choices: 0-255

                    ezpl.take_label :  , Choices: 0-255

                    ezpl.restore_defaults, Choices: reload printer,reload network

                    alerts.

                    alerts.configured : COLD START,SNMP,Y,N,255.255.255.255,162,N

                    alerts.add

                    alerts.conditions : ALL MESSAGES, PAPER OUT, RIBBON OUT, HEAD TOO HOT, HEAD COLD, HEAD OPEN, SUPPLY TOO HOT, RIBBON IN, REWIND, CUTTER JAMMED, PRINTER PAUSED, PQ JOB COMPLETED, LABEL READY, HEAD ELEMENT BAD, BASIC RUNTIME, BASIC FORCED, POWER ON, CLEAN PRINTHEAD, MEDIA LOW, RIBBON LOW, REPLACE HEAD, BATTERY LOW, RFID ERROR, MOTOR OVERTEMP, PRINTHEAD SHUTDOWN, COLD START, SGD SET, SHUTTING DOWN, RESTARTING, NO READER PRESENT, THERMISTOR FAULT, INVALID HEAD, COUNTRY CODE ERROR, MCR RESULT READY, PMCU DOWNLOAD, RIBBON AUTH ERROR, ODOMETER TRIGGERED

                    alerts.destinations : SERIAL, PARALLEL, E-MAIL, TCP, UDP, SNMP, USB, HTTP-POST, BLUETOOTH, SDK

                    alerts.tracked_settings.

                    alerts.tracked_settings.zbi_notified : 

                    alerts.tracked_settings.log_tracked : 

                    alerts.tracked_settings.log : 

                    alerts.tracked_settings.max_log_entries : 100 , Choices: 0-10000

                    alerts.tracked_settings.clear_log

                    alerts.http.

                    alerts.http.proxy : 

                    alerts.http.logging.

                    alerts.http.logging.entries

                    alerts.http.logging.max_entries : 0 , Choices: 0-10000

                    alerts.http.logging.clear

                    alerts.http.authentication.

                    alerts.http.authentication.add

                    alerts.http.authentication.remove

                    alerts.http.authentication.entries : 

                    weblink.

                    weblink.enable : off

                    weblink.printer_reset_required : no

                    weblink.restore_defaults

                    weblink.logging.

                    weblink.logging.entries

                    weblink.logging.max_entries : 0 , Choices: 0-10000

                    weblink.logging.clear

                    weblink.ip.

                    weblink.ip.conn1.

                    weblink.ip.conn1.location : 

                    weblink.ip.conn1.retry_interval : 10 , Choices: 1-600

                    weblink.ip.conn1.proxy : 

                    weblink.ip.conn1.maximum_simultaneous_connections : 10 , Choices: 1-100

                    weblink.ip.conn1.authentication.

                    weblink.ip.conn1.authentication.add

                    weblink.ip.conn1.authentication.remove

                    weblink.ip.conn1.authentication.entries : 

                    weblink.ip.conn1.test.

                    weblink.ip.conn1.test.location : http://www.zebra.com/apps/linktest

                    weblink.ip.conn1.test.test_on : failure , Choices: off,failure,interval,both

                    weblink.ip.conn1.test.retry_interval : 900 , Choices: 1-1800

                    weblink.ip.conn1.num_connections : 0

                    weblink.ip.conn2.

                    weblink.ip.conn2.location : 

                    weblink.ip.conn2.retry_interval : 10 , Choices: 1-600

                    weblink.ip.conn2.proxy : 

                    weblink.ip.conn2.maximum_simultaneous_connections : 10 , Choices: 1-100

                    weblink.ip.conn2.authentication.

                    weblink.ip.conn2.authentication.add

                    weblink.ip.conn2.authentication.remove

                    weblink.ip.conn2.authentication.entries : 

                    weblink.ip.conn2.test.

                    weblink.ip.conn2.test.location : http://www.zebra.com/apps/linktest

                    weblink.ip.conn2.test.test_on : failure , Choices: off,failure,interval,both

                    weblink.ip.conn2.test.retry_interval : 900 , Choices: 1-1800

                    weblink.ip.conn2.num_connections : 0

                    weblink.cloud_connect.

                    weblink.cloud_connect.enable : on , Choices: on,off

                    weblink.cloud_connect.connect

                    weblink.cloud_connect.status : NOT ACTIVE

                    weblink.cloud_connect.connection_key : 0000000000

                    weblink.cloud_connect.configuration_key : 0000000000

                    weblink.cloud_connect.configuration_confirmation : none , Choices: none,accept,reject,complete

                    weblink.zebra_connector.

                    weblink.zebra_connector.version : 0.04

                    weblink.zebra_connector.enable : on , Choices: on,off

                    weblink.zebra_connector.proxy : 

                    weblink.zebra_connector.authentication.

                    weblink.zebra_connector.authentication.add

                    weblink.zebra_connector.authentication.remove

                    weblink.zebra_connector.authentication.entries : 

                    capture.

                    capture.channel1.

                    capture.channel1.port : off , Choices: usb,bt,off

                    capture.channel1.delimiter :

                     

                    capture.channel1.max_length : 1000 , Choices: 1-3000

                    capture.channel1.count : 0 , Choices: 0-4294967295

                    capture.channel1.data.

                    capture.channel1.data.raw : 

                    capture.channel1.data.mime : 

                    nfc.

                    cradle.

                    ribbon.

                    ""

                  • Re: Pdf print
                    Manuel Caicedo-Rivera

                    Hi Mina,

                     

                    Please, send these commands to the printer by using the ZSU tool.

                     

                    ! U1 "ezpl.media_type" "continuous"

                    ! U1 "ezpl.print_mode" "tear off"

                     

                    Send to print jobs tests, and let us know if it fixed the issue.

                     

                    Thanks,

                     

                    MC