Browser Print Update!

Patrick, we are aware of the issue with the downloads and are actively working to address it as quickly as possible. The issue is intermittent so please try again to download.

Robin,

Does the browser print setup have a thinner client based install that doesn't include the SDK?

Thanks,
Mike Pisano

Hi Robin,

Does the Browser Print software work for the printer ZM400??

Thanks in advance,
Buddika

Hi Zebra,

I have downloaded and installed Zebra Browser Print, and it works flawlessly on my USB Connected Zebra GK420t.
Now I am trying to access this printer remotely using Zebra Browser Print and change "localhost:9100" into "192.168.0.77:9100" the computer ip.

The following error occurred
BrowserPrint-1.0.2.min.js:102 GET <a href="http://192.168.0.77:9100/default?type=printer">http://192.168.0.77:9100…; 500 (Internal Server Error)
XMLHttpRequest cannot load <a href="http://192.168.0.77:9100/default?type=printer">http://192.168.0.77:9100…;. The 'Access-Control-Allow-Origin' header contains the invalid value '127.0.0.1'. Origin 'null' is therefore not allowed access.

if I access <a href="http://192.168.0.77:9100/default?type=printer">http://192.168.0.77:9100…; , the result is "Remote access not allowed"
if I access <a href="http://localhost:9100/default?type=printer">http://localhost:9100/defau…; , the result is it shows a Dialog Box properly

I understand that perhaps there is a security implementation from Zebra Browser Print, but I wish to override this

The plan is to allow every single locally connected device (including but not limited to mobile phone / tablet) to be able to print barcode on this Printer which is USB Connected to a computer at 192.168.0.77

Thanks a lot for your help

PS : <a href></a>&nbsp; this is not working too, I think it is because this GK420t is connected via usb?

We have two Windows computers and had Browser Print installed on both, one connecting to a local USB ZD410, the other connecting over the network to the same ZD410. Everything worked fine.

THEN we had to swap the computers around.

Browser Print, on the computer that used to have the ZD410 connected remotely over the network, works just fine with the printer connected locally with USB.

But Brower Print on the computer that used to have the ZD410 connected connected locally with USB will not connect to the printer over the network.&nbsp; I cannot get Browser Print to delete the local printer: information and look on the network for a different printer.

I have uninstalled and reinstalled.

Can you help me get Browser Print to delete the local printer information? And get it looking on the network for the shared computer?

Thanks,

Hi <a href></a>​ and <a href></a>​!

It seems that ZT400 series are now supported. Are ZT600 series also supported via Network connection?

Leandro, the ZT600 has not been explicitly tested with Browser Print since it was released after the latest version of the software. As the ZT600 is a Link-OS printer we do not expect there to be any issues, but technically it is unsupported at this time because it has not gone through the same testing as the ZT400 with Browser Print.

Hi Zebra.

I had a ZT230 printer with usb to usb connection which is working fine with Browser Print. But after I added another ZT230 printer, Browser Print could not detect this new one. It was not detected by Browser Print Settings app either. The new ZT230 has a parallel port(printer side) to usb port(PC side) connection and I think it's the problem. To clarify the reason I want to ask if parallel port to usb connection is not supported or multiple same model printers are not supposed to be used together.

i use printer ZM400
i program web and use Brower print v1.2.0.3

but i dont print korean
just like ????

Browser print not support korean?

Hi Robin,

I've problem using a network attachad Zebra printer. Printing works fine using USB.Any suggestions?
Please read my article: <a href></a>

I would really appreciate some help or guidence :-)

Kind regards,

/Mikael

Hi Robin

I sent a support message via the main site regarding this but no idea if it will end up in the right hands.

Are you aware the form to download browserprint is broken? Tried on Edge and Chrome, looks like something is wrong with the recaptcha script.

Also I was thinking of trying it as an alternative to direct generic/text printing as the customer isn't getting a printout when they try one of my sample labels on a LP 2824-Z+ (no idea why they selected the correct USB port). They are using some third party software called LabelTrace to print labels via an activX control for an existing application.

If I was to use your solution do you see any potential issues with running this LabelTrace software along side it? Anything I set up on the client machines can not alter any of their current set up (I appreciate you may not have an answer to this)

Thanks in advance.

HI Zebra,
we have GC420t connected via Network connections (print server) on parallel port.download browser print for windows PC and then test with your example (file:///C:/Program%20Files%20(x86)/Zebra%20Technologies/Zebra%20Browser%20Print/ZebraBrowserPrintDocsWebCodeExamples/sample/index.html), but this is the message "No Zebra Printers could be found!". If i select&nbsp; from menù File--&gt;Print--&gt;Select ZDesignerGC420t--&gt;OK , the page is printed

How can i send my label?
The printer isn't in your printer supported
SO: Win 10 Pro 64 bit
Browser: Chrome Version 56.0.2924.87 (64-bit), FireFox mozilla 53.0b6 (64 bit), Microsoft Edge 38.14393.0.0